05-19-2021, 05:46 PM
(This post was last modified: 05-19-2021, 07:28 PM by Daniel_BlueWave.)
Hello All,
So first thing I should mention, I think it's not the OAP problem but the phone and AA in general. Anyway, I'm posting this here with hopes that someone has a solution for this.
My setup:
OAP 13 (tried 12 as well)
Raspberry pi 3b+
Generic USB SoundCard
AA via 5Ghz hotspot
Oneplus 7 Pro
I'm using AA wireless with standard connection method. issues started after I've upgraded my phone. When I've upgraded it to Android 11, AA was updated as well. Since then, I was able to launch AA wireless like 3 times (out of about 100).
Seems that issue is that when you try to start AA Wireless, phone start the connection, you can even see black screen of AA launch (that short app switch back and forth), but just after that phone disconnects from the RPi hotspot and thus fails to connect to OAP because of the timeout. After 5-10 seconds phone connects back to the RPi hotspot, but it's too late and AA is not working. That happens every time.
I've tried to switch on and off various options mentioned in the https://bluewavestudio.io/community/show...p?tid=1540 post, but that didn't help.
One thing I can mention that AA Debug server + connection via IP works fine (I hear sound cracking, but I haven't checked maybe pusleaudio cfg has been changed after the OAP update). I suppose it's logical that it works, because initiation procedure is different and phone does not disconnect from the hotspot.
Has anyone encountered such issue of hotspot disconnect during AA initiation and maybe even found a workaround for it?
So first thing I should mention, I think it's not the OAP problem but the phone and AA in general. Anyway, I'm posting this here with hopes that someone has a solution for this.
My setup:
OAP 13 (tried 12 as well)
Raspberry pi 3b+
Generic USB SoundCard
AA via 5Ghz hotspot
Oneplus 7 Pro
I'm using AA wireless with standard connection method. issues started after I've upgraded my phone. When I've upgraded it to Android 11, AA was updated as well. Since then, I was able to launch AA wireless like 3 times (out of about 100).
Seems that issue is that when you try to start AA Wireless, phone start the connection, you can even see black screen of AA launch (that short app switch back and forth), but just after that phone disconnects from the RPi hotspot and thus fails to connect to OAP because of the timeout. After 5-10 seconds phone connects back to the RPi hotspot, but it's too late and AA is not working. That happens every time.
I've tried to switch on and off various options mentioned in the https://bluewavestudio.io/community/show...p?tid=1540 post, but that didn't help.
One thing I can mention that AA Debug server + connection via IP works fine (I hear sound cracking, but I haven't checked maybe pusleaudio cfg has been changed after the OAP update). I suppose it's logical that it works, because initiation procedure is different and phone does not disconnect from the hotspot.
Has anyone encountered such issue of hotspot disconnect during AA initiation and maybe even found a workaround for it?