08-18-2019, 08:34 PM
(This post was last modified: 08-18-2019, 08:37 PM by Wesley_125.)
I order this USB camera: MagiDeal Auto Rückfahrkamera Rückfahrsystem mit 120 Winkel Farbweitwinkelobjektiv, Infrarot-LED Nachtsicht HD, Wasserdicht mit 1m USB Kabel https://www.amazon.de/dp/B072QZCH4J/ref=...wDbTTBHA6J
and also this USB cable with repeater: Rhombutech® 10 Meter USB 2.0 Verlängerung, Aktiv, Repeater, Verlängerungskabel, doppelt geschirmt, vergoldete Kontakte (AF-10 Meter) https://www.amazon.de/dp/B07DPNJ416/ref=...wDbHC41JJE
I don't know if this setup will worked. The USB cable is already in place. Only need to wait for the camera to arrive.
So it is possible 2 have 2 cameras connected? Or am I seeing this wrong? ?
and also this USB cable with repeater: Rhombutech® 10 Meter USB 2.0 Verlängerung, Aktiv, Repeater, Verlängerungskabel, doppelt geschirmt, vergoldete Kontakte (AF-10 Meter) https://www.amazon.de/dp/B07DPNJ416/ref=...wDbHC41JJE
I don't know if this setup will worked. The USB cable is already in place. Only need to wait for the camera to arrive.
(08-18-2019, 08:08 PM)Daniel_BlueWave Wrote: @stefi thank you for your feedback.
In our current solution there is no need to configure USB or RPi camera - default one will work as soon as it is connected. In case you are using two interfaces in your project, you are able to chose one for rear view in OAP directly.
fyi the OBD is almost done.
So it is possible 2 have 2 cameras connected? Or am I seeing this wrong? ?