01-10-2023, 10:06 AM
Hey,
Thanks for your reply.
If the problem you are reffering to is the unit crashing when power is briefly cycled shortly after initial startup, you may be able to add the following line to your /boot/config.txt:
gpio=25=op,dh
This will force the power latch pin high shortly after initial boot, rather than waiting for the python script to run.
Let me know if that helps your issue!
Thanks,
Sam
Thanks for your reply.
If the problem you are reffering to is the unit crashing when power is briefly cycled shortly after initial startup, you may be able to add the following line to your /boot/config.txt:
gpio=25=op,dh
This will force the power latch pin high shortly after initial boot, rather than waiting for the python script to run.
Let me know if that helps your issue!
Thanks,
Sam