hi
running 13.1 on Pi4 8GB with Hifiberry digi+
Having the absolute worst time getting audio to play.
The player will choose a track, but not actually play it; i.e. the play icon will change to pause icon, but the time on the track won't advance past zero (or wherever the time slider is located)
I have:
in /boot/config.txt
added dtoverlay=hifiberry-digi as per hifiberry instructions
tried to
in /home/pi/.config/pulse/default.pa I have modified
I can get sound and track progression if I've plugged into output jack on ext usb sound card, but not on optical out.
I've checked the hardware through libreelec install, and optical out works fine using that.
Would really like to get this working.
my config.txt
running 13.1 on Pi4 8GB with Hifiberry digi+
Having the absolute worst time getting audio to play.
The player will choose a track, but not actually play it; i.e. the play icon will change to pause icon, but the time on the track won't advance past zero (or wherever the time slider is located)
I have:
in /boot/config.txt
1. /boot/config.txt
Remove or comment line (add # at the beginning of the line) "dtparam=audio=off"
2. /boot/config.txt
Add line "dtparam=audio=on"
commented out dtparam=audio=on as per hifiberry instructionsadded dtoverlay=hifiberry-digi as per hifiberry instructions
tried to
3. /etc/modprobe.d/raspi-blacklist.conf
Remove line "blacklist snd_bcm2835"
but that file's emptypacmd list-sinks | grep -e 'name:' -e 'index:'
index: 0
name: <alsa_output.usb-Andrea_Electronics_Andrea_Comm_USB-SA_Headset_SEP_2015-00.analog-stereo>
index: 1
name: <alsa_output.platform-soc_sound.iec958-stereo>
* index: 2
name: <equalizer_sink>
index: 3
name: <equalizer_sink.echo-cancel>
in /home/pi/.config/pulse/default.pa I have modified
load-module module-ladspa-sink sink_name=equalizer_sink plugin=mbeq_1197 label=mbeq control=-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10 master=alsa_output.platform-soc_sound.iec958-stereo
when I do so, track time doesn't advance; if everything after "-10" is removed, track time advances but no soundI can get sound and track progression if I've plugged into output jack on ext usb sound card, but not on optical out.
I've checked the hardware through libreelec install, and optical out works fine using that.
Would really like to get this working.
my config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
#dtparam=audio=off
#dtparam=audio=on
dtoverlay=disable-bt
disable_splash=1
dtoverlay=vc4-fkms-v3d
[pi3]
gpu_mem=256
max_framebuffers=1
[pi3+]
gpu_mem=256
max_framebuffers=1
[pi4]
max_framebuffers=2
[all]
force_eeprom_read=0
dtoverlay=hifiberry-digi