(10-29-2019, 06:18 PM)botswanabub Wrote: Hi,
even my solution is working fine I tried to avoid the permanent SD/SSD write accesses.
Therefore I established a psydo tty with socat and a output script for the temperature.
As path in the OAP config I set
(in my case 5)./dev/pts/5
Now the OAP App is not starting. terminates at startscreen.
out at this ptty:
f.e.t=45000
Now I tried to understand the reason.
Please check if provided descriptor has right permissions (reading as PI user should be possible).