Communication Error 2 - Printable Version +- BlueWave Studio forum (https://bluewavestudio.io/community) +-- Forum: OpenAuto Pro (https://bluewavestudio.io/community/forum-86.html) +--- Forum: Android Auto (https://bluewavestudio.io/community/forum-79.html) +--- Thread: Communication Error 2 (/thread-3865.html) |
Communication Error 2 - Bothjacalope - 07-09-2023 The Story Hello! I have been interested in OpenAuto Pro for about 2 years now and have been slowly working on a head unit over that time (It should have taken a month, but Raspberry Pi supply issues..) I had gotten everything working wireless Android Auto / Wired Android auto fixed aspect ratio issues due to my non-standard display (see below). Then I set it aside for a couple of weeks back in June 2023 - when I came back to it today and attempted to set it up, I've suddenly gotten communication error 2 on every phone I try to connect to it (Wireless or Non-Wireless) - after searching this forum, I've found one other person with this issue, and they seem to have resolved it however this solution (Changing the DPI in Android Auto Settings on OAP too 200) Did not work for me and neither did the other possible solutions recommended. What I've tried (Im Going to refer to the Pixel 7 Pro as P7P and the Pixel 4A 5G as P4A5 To save space)
My Setup
Let me know if I can if there is any other info I can provide to help solve this error - the next step I will take is reflashing the SD Card, and I will reply if it does/doesn't work - if anyone has any idea how to solve this, please let me know! Also It wouldnt let me attach a screen shot of the error but googling "Android Auto Com error 2" will bring you right too one RE: Communication Error 2 - Daniel_BlueWave - 07-10-2023 Hello, check this solution: https://bluewavestudio.io/community/thread-3749-post-19507.html#pid19507 RE: Communication Error 2 - Bothjacalope - 07-10-2023 (07-10-2023, 05:34 AM)Daniel_BlueWave Wrote: Hello, check this solution: https://bluewavestudio.io/community/thread-3749-post-19507.html#pid19507 Thank you for your swift response - unfortunately I have already attempted both solutions shown in this thread as you can see in my "What I've Tried" section (the two at the bottom) RE: Communication Error 2 - Daniel_BlueWave - 07-11-2023 Error 2 is coming from misalignment in video resolution. Please check again. If still no success, I would suggest to re-flash the sd-card with OAP and perform factory reset of your phone. RE: Communication Error 2 - Bothjacalope - 07-11-2023 (07-11-2023, 06:35 AM)Daniel_BlueWave Wrote: Error 2 is coming from misalignment in video resolution. Please check again. I rechecked the Resolution to make sure it matches in OAP and Dev settings on the P7P (Including trying a couple of different options) still didn't solve the issue I will reflash my card and post a reply in a day or so! thanks again for your help |