Build instructions for aasdk

Here you can find information how to do some things with OpenAuto
Post Reply
BlueWave
Site Admin
Posts: 101
Joined: Tue Sep 18, 2018 6:30 am

Build instructions for aasdk

Post by BlueWave » Tue Oct 16, 2018 9:08 am

Prerequisites
  • CMake
  • OpenSSL
  • Boost libraries 1.61 or higher
  • libusb 1.0.0 or higher
  • Protocol buffers 3.0 or higher
  • C++ compiler with support of C++14 standard
Raspberry PI 3 (stretch)
1. Install needed software

Code: Select all

$ sudo apt-get install -y libboost-all-dev libusb-1.0.0-dev libssl-dev cmake libprotobuf-dev protobuf-c-compiler protobuf-compiler
2. Clone aasdk repository

Code: Select all

$ cd

$ git clone -b master https://github.com/f1xpl/aasdk.git
3. Create aasdk_build directory at the same level as aasdk dir

Code: Select all

$ mkdir aasdk_build

$ cd aasdk_build
4. Generate cmake files

Code: Select all

$ cmake -DCMAKE_BUILD_TYPE=Release ../aasdk
5. Build aasdk

Code: Select all

$ make

Post Reply