Corsa D 2008

Show us your implementation of our products.
Post Reply
Posts: 1
Joined: Mon May 13, 2019 10:24 am

Corsa D 2008

Post by JYewman » Mon May 13, 2019 11:07 am

Here is my OpenAuto Pro project. I have completely replaced the headunit and display with OpenAuto. I have a Raspberry Pi 3 B running the system, connected to a USB Soundblaster card which is in turn connected to a 4-channel speaker amp. I am using a 7-inch touch screen for the display which is connected via HDMI and USB.

I have connected the original headunit volume control to the Raspberry Pi to allow me to easily change the volume using the rotary encoder.

For power, I am using 2 12v to 5v step-down converters, one for the display and one for the Raspberry Pi.

I plan to add a safe shutdown system very soon as currently I manually shutdown the Pi before I turn off the car. I am also working on CAN-Bus decoding to allow me to read the steering wheel controls, vehicle speed, engine revolutions, fuel, etc...

rsz_img_20190513_112618-min.jpg (119.13 KiB) Viewed 111 times
rsz_img_20190513_112541-min.jpg (118.57 KiB) Viewed 111 times
rsz_img_20190513_112651-min.jpg (111.57 KiB) Viewed 111 times

Site Admin
Posts: 524
Joined: Tue Sep 18, 2018 6:30 am

Re: Corsa D 2008

Post by BlueWave » Tue May 14, 2019 3:51 pm

Just perfect. Your project is excellent example how much you can do with OpenAuto Pro if you spend some time on setup and configuration.

Clean installation, great fit of touch screen. Thanks for sharing. :)

Post Reply