Pican board installing

[airulegi]

Hi to all
I recently purchased openauto pro and Icarplay plugin and I want to install it on my aud RNSE using a pican board. when I try it on a raspberry pi image with no openauto it works fine but with the openauto image it doesent.

I added those lines on /boot/config.txt
[b]dtparam=spi=on
dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25
dtoverlay=spi-bcm2835-overlay[/b] 

then rebooted and type this command


[b]sudo /sbin/ip link set can0 up type can bitrate 500000[/b]

[b]but everytime got this answer "Cannot find device "can0"[/b]

[b]what I'm doing wrong?[/b]

[b]Any help would be appreciated [/b]

[Daniel_BlueWave]

Hi, please provide us with this information: https://bluewavestudio.io/community/thread-1385.html

[airulegi]

Hi, please provide us with this information: https://bluewavestudio.io/community/thread-1385.html

System requirements:
a. What is the version of your RPI?: RPI 4B
b. Power supply details: ORIGINAL RPI 
c. Model of external sound card: USB TECHOLE
d. Do you have microphone input? NO
e. Details of your Bluetooth dongle.
f. Touchscreen model NO TOUCHSCREEN

2. Android Auto:
a. Which version of Android Auto have you installed on your phone?
b. Model of your phone.

3. Plugin CarPlay Autobox (optional)
a. dongle name (and link to the shop if possible): CPC200-CCPM
b. iPhone and iOS version: IPHONE X - IOS 16.3.1

4. Steps to reproduce your issue
I want to control CARPLAY with my RNSE buttons using the spkang pican board but I can´t enable it.
I recently purchased openauto pro and carplay plugin and I want to install it on my aud RNSE using a pican board. when I try it on a raspberry pi image with no openauto it works fine but with the openauto image it doesent.

I added those lines on /boot/config.txt
dtparam=spi=on
dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25
dtoverlay=spi-bcm2835-overlay

then rebooted and type this command


sudo /sbin/ip link set can0 up type can bitrate 500000

but everytime got this answer "Cannot find device "can0"

Thanks in advance

[airulegi]

Problem solved.
I finally solved the pican board problem. I did a fresh install of the system and now is working perfect.
Many thanks

[Daniel_BlueWave]

Thank you for the feedback. Sorry that we did not manage to replay.