02-18-2023, 12:03 AM
Just purchased Open Auto Pro, installed with no seeming issues, but unable to actually connect my phone to it.
Here's the hardware I'm working with:
I'm following, as best I can, the instructions here: https://bluewavestudio.io/community/show...p?tid=1540
Having gone through everything I could, I've connected my phone to OpenAuto-Pro as a Bluetooth device, and I've connected to the OpenAutoPro WiFi hotspot. But when I try to open Android Auto via Wi-Fi, it just says "Android Auto is currently unavailable." Same thing happens if I connect via IP address.
Not sure if it's relevant, but where the instructions say, "Enable ‘Add Wireless Projection To Settings’ and then close AA." No such setting is present for me in Developer Settings. (Yes, I did enable developer mode.)
How do I get this to work? Thanks!
Here's the hardware I'm working with:
- Raspberry Pi 4 B 2GB
- Creative Sound Blaster G3 external sound card: https://www.amazon.com/gp/product/B081ZN9K2M
- Random cheapo speaker and microphone (two separate devices), both plugged into the sound card for setup purposes since instructions say I need them
- ASUS USBBT500 Bluetooth adapter: https://www.bestbuy.com/site/asus-usbbt5.../6428133.p
- Google Pixel 7 Pro
I'm following, as best I can, the instructions here: https://bluewavestudio.io/community/show...p?tid=1540
Having gone through everything I could, I've connected my phone to OpenAuto-Pro as a Bluetooth device, and I've connected to the OpenAutoPro WiFi hotspot. But when I try to open Android Auto via Wi-Fi, it just says "Android Auto is currently unavailable." Same thing happens if I connect via IP address.
Not sure if it's relevant, but where the instructions say, "Enable ‘Add Wireless Projection To Settings’ and then close AA." No such setting is present for me in Developer Settings. (Yes, I did enable developer mode.)
How do I get this to work? Thanks!