RNS-E (800x480) alignment

[WilQ]

I'm using RCA and struggling with correct alignment.
Used many file from this forum, here are two of them:

- first one:

overscan_left=-15
overscan_right=-40
overscan_top=-55
overscan_bottom=-40
framebuffer_width=800
framebuffer_height=480
sdtv_aspect=3

overscan_scale=1

- below, my config (aspect 15:9 as it's same as 800/480):

overscan_bottom=-40
framebuffer_width=800
framebuffer_height=480
sdtv_aspect=6

overscan_scale=1

[BlueWave]

Please post more details how did you connect the Pi to your screen?

[WilQ]

Raspberry Pi -> Composite (yellow) cinch [soldered straight to the Raspberry PCB] -> AV input of Audi TV Tuner [4D0 919 146 D]

[BlueWave]

As far as we know Composite output has some problems with overscan settings. Overscan is part of the Raspberry PI OS firmware. You can try to post your problem at https://forums.raspberrypi.com/.

[WilQ]

Converter Faulty so No color, but on HDMI it still getting cropped from right.

[BlueWave]

Try to toggle PAL/NTSC settings on your converter.

Now, with HDMI converter, you must find correct overscan settings for your screen.