02-03-2022, 05:14 PM
hi,
so a bought a car pi hat and want to get an idrive to work over canbus
i have set up the can bus as per geckos GitHub instructions https://github.com/gecko242/CarPiHat ,
i have set up controller service as per instructions on the forum,
i have wired the idrive contorller as per bluwaves instructions in the email,
doing a loopback test on can0 i can see this
pi@raspberrypi:~ $ candump can0
can0 1AA [8] 8F 17 F2 00 00 00 00 00
the message just repeats.
controller service always seems to give me errors
pi@raspberrypi:~ $ controller_service /home/pi/.openauto/config/openauto_control ler_service.ini
[2022-02-03 16:54:14.709546] [0xb6f621c0] [info] [OpenAuto] [ControllerServic e] version: 15.0
Error: Can't open display: (null)
[2022-02-03 16:54:14.710286] [0xb6f621c0] [info] [OpenAuto] [ControllerServic e] running...
[2022-02-03 16:54:15.710443] [0xb6f621c0] [error] [OpenAuto] [BMWIDriveControl ler] IDrive controller communication error: Connection timed out
or
pi@raspberrypi:~ $ controller_service /home/pi/.openauto/config/openauto_controller_service.ini
[2022-02-03 17:10:07.564565] [0xb6efa1c0] [info] [OpenAuto] [ControllerService] version: 15.0
Error: Can't open display: (null)
[2022-02-03 17:10:07.565326] [0xb6efa1c0] [info] [OpenAuto] [ControllerService] running...
[2022-02-03 17:10:07.565479] [0xb6efa1c0] [error] [OpenAuto] [BMWIDriveController] IDrive controller communication error: No buffer space available
does anyone know what I'm doing wrong ?
so a bought a car pi hat and want to get an idrive to work over canbus
i have set up the can bus as per geckos GitHub instructions https://github.com/gecko242/CarPiHat ,
i have set up controller service as per instructions on the forum,
i have wired the idrive contorller as per bluwaves instructions in the email,
doing a loopback test on can0 i can see this
pi@raspberrypi:~ $ candump can0
can0 1AA [8] 8F 17 F2 00 00 00 00 00
the message just repeats.
controller service always seems to give me errors
pi@raspberrypi:~ $ controller_service /home/pi/.openauto/config/openauto_control ler_service.ini
[2022-02-03 16:54:14.709546] [0xb6f621c0] [info] [OpenAuto] [ControllerServic e] version: 15.0
Error: Can't open display: (null)
[2022-02-03 16:54:14.710286] [0xb6f621c0] [info] [OpenAuto] [ControllerServic e] running...
[2022-02-03 16:54:15.710443] [0xb6f621c0] [error] [OpenAuto] [BMWIDriveControl ler] IDrive controller communication error: Connection timed out
or
pi@raspberrypi:~ $ controller_service /home/pi/.openauto/config/openauto_controller_service.ini
[2022-02-03 17:10:07.564565] [0xb6efa1c0] [info] [OpenAuto] [ControllerService] version: 15.0
Error: Can't open display: (null)
[2022-02-03 17:10:07.565326] [0xb6efa1c0] [info] [OpenAuto] [ControllerService] running...
[2022-02-03 17:10:07.565479] [0xb6efa1c0] [error] [OpenAuto] [BMWIDriveController] IDrive controller communication error: No buffer space available
does anyone know what I'm doing wrong ?