01-19-2022, 08:56 AM
Hello everyone
I'm still very new to OAP and yesterday I got most of it up and running. Unfortunately I can't get the PiCam to work. When I press Rear Camera in the OAP, I get a black screen.
In the OS when I run:
I get:
and
Gear Informations:
Raspberry Pi 3+ Model B (tested on 3 different pi's)
PiCamera Vers. 2.1 (tested with 2 different PiCamera)
Generic Raspberry Pi 7" Display
Generic 3A 5V/DC Adapter (1x for the Pi, 1x for the display)
microSDXC 16GB Card (tested with 2 different)
OpenAuto Pro Version 14.0 (I mounted the SD-Card with both img's from the two separate servers from the mail)
The Pi is updated with
The connections to and from the PiCamera module are tested. When I run it on an other OS (eg. Raspian or motionEye) the camera works fine.
The camera is enabled in the raspi-config.
I even changed the /boot/config.txt file as explained in this thread:
Camera working in OOP8 but not OOP12?!? (bluewavestudio.io)
What am I missing? Anyone an idea?
I'm still very new to OAP and yesterday I got most of it up and running. Unfortunately I can't get the PiCam to work. When I press Rear Camera in the OAP, I get a black screen.
In the OS when I run:
raspistill -o Desktop/image.jpg
I get:
mmal: Cannot read camera info, keeping the defaults for OV5647
mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM)
mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1)
mmal: Failed to create camera component
mmal: main: Failed to create camera component
mmal: Camera is not enabled in this build. Try running "sudo raspi-config" and ensure that "camera" has been enabled
and
vcgencmd get_camera
outputsupported=0 detected=0
Gear Informations:
Raspberry Pi 3+ Model B (tested on 3 different pi's)
PiCamera Vers. 2.1 (tested with 2 different PiCamera)
Generic Raspberry Pi 7" Display
Generic 3A 5V/DC Adapter (1x for the Pi, 1x for the display)
microSDXC 16GB Card (tested with 2 different)
OpenAuto Pro Version 14.0 (I mounted the SD-Card with both img's from the two separate servers from the mail)
The Pi is updated with
apt update && apt upgrade
apt dist-upgrade
raspi-upgrade
The connections to and from the PiCamera module are tested. When I run it on an other OS (eg. Raspian or motionEye) the camera works fine.
The camera is enabled in the raspi-config.
I even changed the /boot/config.txt file as explained in this thread:
Camera working in OOP8 but not OOP12?!? (bluewavestudio.io)
What am I missing? Anyone an idea?