12-12-2021, 09:37 PM
Just purchased OpenAuto Pro for a personal project this weekend and was excited to get started on it. But ran into issues getting it to actually boot.
Hardware:
Raspberry Pi 4B 8GB
Raspberry Pi 7in Touchscreen
SanDisk 32GB Micro SDHC U1 Class
I am getting a kernel panic when it is booting and fails to go any further, its about 5s into the boot process and it hangs. I have taken a photo and attached it to this post.
Now I have another Micro SDCard that has Raspberry Pi OS Bullseye 64bit on it and it boots fine, so I know the hardware is fine.
I have redownloaded the installer from both download sources, unzipped and compared. Both result in the same issue.
I have attempted to reimage using BalenaEtcher and Raspberry Pi Imager with no further success
I have tried another 32GB MicroSD U1 Class card as well with no success.
I did put Ubuntu for Raspberry Pi on one of the MicroSDs and confirmed the card does work.
Hardware:
Raspberry Pi 4B 8GB
Raspberry Pi 7in Touchscreen
SanDisk 32GB Micro SDHC U1 Class
I am getting a kernel panic when it is booting and fails to go any further, its about 5s into the boot process and it hangs. I have taken a photo and attached it to this post.
Now I have another Micro SDCard that has Raspberry Pi OS Bullseye 64bit on it and it boots fine, so I know the hardware is fine.
I have redownloaded the installer from both download sources, unzipped and compared. Both result in the same issue.
I have attempted to reimage using BalenaEtcher and Raspberry Pi Imager with no further success
I have tried another 32GB MicroSD U1 Class card as well with no success.
I did put Ubuntu for Raspberry Pi on one of the MicroSDs and confirmed the card does work.