|
11-28-2021, 11:09 AM
(11-28-2021, 09:07 AM)Ricthewheelie Wrote: Hi, Hello, Did you send a new mail or send it in a chain? Please follow https://bluewavestudio.io/community/show...hp?tid=848 carefully.
11-30-2021, 09:36 PM
Still nothing about this: https://bluewavestudio.io/community/show...p?tid=2339 ?
Version 14 works with bullseye?
01-11-2022, 09:19 PM
Hello, i have some issue setting the horizontal margin (note: i saw this issue in the version 13 if i remember corectly)
I was previously running version 12 and all was well, how ever after the update i spend 2h playing with vertical and horizontal margin with no luck, i still cant make fit AA on the screen At some point if i increase horizontal margin, it decrease it "visualy" then if i add vertical margin it does increase horizontal... very weird On the version 12 i had 0 vertical margin, 50 horizontal and 150 DPI Any ideas what should i do? Note: i use composite output of rpi4
01-12-2022, 09:04 AM
What screen are you using?
01-12-2022, 03:05 PM
I am using the stock screen of a 2007 s550 its 480p if i am correct
Did you try to change overscan settings in /boot/config.txt?
https://www.raspberrypi.com/documentatio...g_txt.html
01-12-2022, 04:55 PM
No i have not, i will try and report back
But its strange that it was working fine out of the box with version 12
Bullseye support +1 please
is there a known timeline for this? I have some applications Id like to use on that, including OAP  Thanks!
Dave Ballard
Solutioneer and Maker of Things Website OAP Setup V15 Rpi 4b+ 8gb CarpiHat OAP Parts used on amazon
01-19-2022, 06:18 PM
(01-19-2022, 06:01 PM)labtopia Wrote: Bullseye support +1 please Unfortunately, Bullseye is still far from being "stable" release. There is no ETA for migration to the Bullseye so far. What apps do you mean exactly? They should also work on Buster. |
|
|
