06-06-2021, 06:50 PM
Issue: Carplay works via USB cable, but get a blank screen using Wireless mode
OpenAuto Pro Version 13.1
System setup:
a. Raspberry Pi: RPi 4 - 4GB
b. PSU: Canakit 3.5A - USB-C
c. External sound - UGREEN USB Audio Adapter
--> https://www.amazon.com/dp/B01N905VOY?psc...ct_details
d. Microphone - YES
e. Bluetooth - DAYKIT Mini USB Bluetooth
--> https://www.amazon.com/dp/B01IM8YKPW?psc...ct_details
f. Touchscreen - Raspberry Pi official 7 inch
g. Camera - Raspberry Pi official camera V2.1
CarPlay setup:
a. Carlinkit CPC200-AutoKit
--> https://www.amazon.com/dp/B08FG421Y7?psc...ct_details
> Firmware version: 2021.02.23.1758CAY (as reported under AutoBox -> Info page on OAP)
b. iPhone 11 - iOS 14.5.1
Notes:
iPhone lists AutoKit as linked Carplay device
AutoBox info screen lists iPhone as Recent Device.
Using USB cable - CarPlay starts up and works properly.
Issue:
When using Wireless mode, screen switches to black but the Carplay interface isn't displayed.
Start OAP, select AutoBox -> WiFi from menu
OAP screen switches to blank (with clock+icons at top)
No obvious (to me) error reported in ~/.openauto/cache/openauto.log (file attached)
Log has a successful connection around 13:52:18 via USB cable, then at 14:21:44 connection via WiFi.
Tried joining AutoBox WiFi on phone before selecting WiFi, tried auto connection... all have same result blank screen (just clock+icons at top of screen)
Is there something else I should check or additional debug I can enable?
OpenAuto Pro Version 13.1
System setup:
a. Raspberry Pi: RPi 4 - 4GB
b. PSU: Canakit 3.5A - USB-C
c. External sound - UGREEN USB Audio Adapter
--> https://www.amazon.com/dp/B01N905VOY?psc...ct_details
d. Microphone - YES
e. Bluetooth - DAYKIT Mini USB Bluetooth
--> https://www.amazon.com/dp/B01IM8YKPW?psc...ct_details
f. Touchscreen - Raspberry Pi official 7 inch
g. Camera - Raspberry Pi official camera V2.1
CarPlay setup:
a. Carlinkit CPC200-AutoKit
--> https://www.amazon.com/dp/B08FG421Y7?psc...ct_details
> Firmware version: 2021.02.23.1758CAY (as reported under AutoBox -> Info page on OAP)
b. iPhone 11 - iOS 14.5.1
Notes:
iPhone lists AutoKit as linked Carplay device
AutoBox info screen lists iPhone as Recent Device.
Using USB cable - CarPlay starts up and works properly.
Issue:
When using Wireless mode, screen switches to black but the Carplay interface isn't displayed.
Start OAP, select AutoBox -> WiFi from menu
OAP screen switches to blank (with clock+icons at top)
No obvious (to me) error reported in ~/.openauto/cache/openauto.log (file attached)
Log has a successful connection around 13:52:18 via USB cable, then at 14:21:44 connection via WiFi.
Tried joining AutoBox WiFi on phone before selecting WiFi, tried auto connection... all have same result blank screen (just clock+icons at top of screen)
Is there something else I should check or additional debug I can enable?