Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Beta version OpenAuto Pro 3.3.2 is available
#1
We are happy to inform you that you can request for beta version of the OpenAuto Pro 3.3.2 

More info here:

OpenAuto Pro Beta 3.2.2

   
Reply
#2
(07-20-2019, 09:18 PM)BlueWave Wrote: We are happy to inform you that you can request for beta version of the OpenAuto Pro 3.3.2 

More info here:

OpenAuto Pro Beta 3.2.2

I’d like to participate please.
Thanks, Frank
Carputer Detail   Parts List
2004 Chevrolet Tahoe Z71 w/ Bose & Onstar
Reply
#3
If you would like to get and test our BETA version of the OpenAuto Pro, send us an email at software@bluewavestudio.io with your order number.
Reply
#4
I've just tried to install 3.3.2 on RP3b+ and encountered several issues.

Picture doesn't fit on screen even after making the necessary adjustments to config.txt to get OAP to fit on my display.
Touchscreen doesn't work.
Reply
#5
(07-21-2019, 06:03 PM)dreamvictim Wrote: I've just tried to install 3.3.2 on RP3b+ and encountered several issues.

Picture doesn't fit on screen even after making the necessary adjustments to config.txt to get OAP to fit on my display.
Touchscreen doesn't work.

That might be related to new GPU driver. If you are using overscan for HDMI screen adjustments please note that as of Raspbian Buster it works only in CEA mode.

Also it might be worth to try use sudo rpi-update command to test latest firmware.

Place where you can see if similar issue was already reported:

https://github.com/raspberrypi/firmware/issues
Reply
#6
just quickly tested rpi4b 4gb with beta 3.3.2 and I must say im surprised by the performance. it is booting much faster from dead start to kodi, and I love it that there is no desktop or anything, just OAP with windows style circle and then straight to kodi (did enable the autostart).
Reply
#7
(07-21-2019, 06:37 PM)BlueWave Wrote: That might be related to new GPU driver. If you are using overscan for HDMI screen adjustments please note that as of Raspbian Buster it works only in CEA mode.

Also it might be worth to try use sudo rpi-update command to test latest firmware.

Place where you can see if similar issue was already reported:

https://github.com/raspberrypi/firmware/issues

I'm using composite cable and have added "Overscan_Scale=1" to config.txt. This works perfectly in previous versions.

I just did some testing connected to an HDMI screen and I can see it works but when connected via composite it takes longer to boot, I don't see the new open auto loading screen, just black screen until raspi desktop appears then it hangs. So I can't get OAP to load in composite.
Reply
#8
(07-21-2019, 09:34 PM)dreamvictim Wrote:
(07-21-2019, 06:37 PM)BlueWave Wrote: That might be related to new GPU driver. If you are using overscan for HDMI screen adjustments please note that as of Raspbian Buster it works only in CEA mode.

Also it might be worth to try use sudo rpi-update command to test latest firmware.

Place where you can see if similar issue was already reported:

https://github.com/raspberrypi/firmware/issues

I'm using composite cable and have added "Overscan_Scale=1" to config.txt. This works perfectly in previous versions.

I just did some testing connected to an HDMI screen and I can see it works but when connected via composite it takes longer to boot, I don't see the new open auto loading screen, just black screen until raspi desktop appears then it hangs. So I can't get OAP to load in composite.

Please have a look at
https://github.com/raspberrypi/firmware/issues/1166
Reply
#9
(07-21-2019, 06:37 PM)BlueWave Wrote: Please have a look at
https://github.com/raspberrypi/firmware/issues/1166

Thanks but I don't think it's that, it happened before and after I did sudo rpi-update. Composite is working but can't see full screen and OAP doesn't load.
Reply
#10
(07-21-2019, 09:53 PM)dreamvictim Wrote:
(07-21-2019, 06:37 PM)BlueWave Wrote: Please have a look at
https://github.com/raspberrypi/firmware/issues/1166

Thanks but I don't think it's that, it happened before and after I did sudo rpi-update. Composite is working but can't see full screen and OAP doesn't load.

According to mentioned issue, it looks like some changes have been done in scope of composite output. Your problem seems to be related so it is definitely worth to report your issue at RPIs github.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)