Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to install OpenAuto Pro
#1
Please follow official RPI instructions:


https://www.raspberrypi.org/documentatio...ng-images/


https://bluewavestudio.io/community/show...hp?tid=816
Reply
#2
"https://www.raspberrypi.org/documentatio...ng-images/"

May need a new link, that one has the ...'s as part of the link!
Reply
#3
Thanks for pointing this. Link updated.
Reply
#4
(06-18-2019, 07:56 PM)BlueWave Wrote: Please follow official RPI instructions:


https://www.raspberrypi.org/documentatio...ng-images/


https://bluewavestudio.io/community/show...hp?tid=816

Hi new user here, i'm struggling with this right out of the gate Sad
I have a RPi 4+ 4GB with a 128GB Sandisk A2 Extreme Plus and a Official RPi 7" touchscreen attached.
Before my Openauto download link arrived I installed Raspbian Buster (non NOOBS version) using etcher to image the Micro SD card  from Windows 10 and it completed just fine and booted into Raspbian and all worked great.

My Open auto download email arrived so I downloaded the zip file and used etcher to image the SD card again as i had done before but the Pi will not boot from the SD card this time, i get a green flash of the activity light when i first apply power but nothing else.
I went back and reflashed the card to the buster image and everything works again, what is it about the openauto download image that fails to boot the Pi ?

This (Win32 Disk Imager) didnt work for me either:
https://bluewavestudio.io/community/show...hp?tid=670

Thanks!
RPi 4+ 4GB
RPi 7" Touch Display
Sandisk 128GB A2 Extremem Plus Micro SD Card

Building a Carputer for my 2006 BMW E91 325i
Reply
#5
(10-12-2019, 10:16 PM)DigitalMetal Wrote:
(06-18-2019, 07:56 PM)BlueWave Wrote: Please follow official RPI instructions:


https://www.raspberrypi.org/documentatio...ng-images/


https://bluewavestudio.io/community/show...hp?tid=816

Hi new user here, i'm struggling with this right out of the gate Sad
I have a RPi 4+ 4GB with a 128GB Sandisk A2 Extreme Plus and a Official RPi 7" touchscreen attached.
Before my Openauto download link arrived I installed Raspbian Buster (non NOOBS version) using etcher to image the Micro SD card  from Windows 10 and it completed just fine and booted into Raspbian and all worked great.

My Open auto download email arrived so I downloaded the zip file and used etcher to image the SD card again as i had done before but the Pi will not boot from the SD card this time, i get a green flash of the activity light when i first apply power but nothing else.
I went back and reflashed the card to the buster image and everything works again, what is it about the openauto download image that fails to boot the Pi ?

This (Win32 Disk Imager) didnt work for me either:
https://bluewavestudio.io/community/show...hp?tid=670

Thanks!

Support of Raspberry PI 4 is under beta testing for now (version 3.3.2RC1). If you want to test it yourself please send us an update request at software@bluewavestudio.io (please include your order number).
Reply
#6
(10-12-2019, 11:12 PM)BlueWave Wrote:
(10-12-2019, 10:16 PM)DigitalMetal Wrote:
(06-18-2019, 07:56 PM)BlueWave Wrote: Please follow official RPI instructions:


https://www.raspberrypi.org/documentatio...ng-images/


https://bluewavestudio.io/community/show...hp?tid=816

Hi new user here, i'm struggling with this right out of the gate Sad
I have a RPi 4+ 4GB with a 128GB Sandisk A2 Extreme Plus and a Official RPi 7" touchscreen attached.
Before my Openauto download link arrived I installed Raspbian Buster (non NOOBS version) using etcher to image the Micro SD card  from Windows 10 and it completed just fine and booted into Raspbian and all worked great.

My Open auto download email arrived so I downloaded the zip file and used etcher to image the SD card again as i had done before but the Pi will not boot from the SD card this time, i get a green flash of the activity light when i first apply power but nothing else.
I went back and reflashed the card to the buster image and everything works again, what is it about the openauto download image that fails to boot the Pi ?

This (Win32 Disk Imager) didnt work for me either:
https://bluewavestudio.io/community/show...hp?tid=670

Thanks!

Support of Raspberry PI 4 is under beta testing for now (version 3.3.2RC1). If you want to test it yourself please send us an update request at software@bluewavestudio.io (please include your order number).

Thanks, I've now installed OpenAuto Pro 3.3.2 and its booting  Big Grin
RPi 4+ 4GB
RPi 7" Touch Display
Sandisk 128GB A2 Extremem Plus Micro SD Card

Building a Carputer for my 2006 BMW E91 325i
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)