11-11-2021, 02:33 PM
Is there a way to setup OPA 13 Cluster Dashboard to retrieve CAN messages directly from PiCAN interface rather than through OBDII ELM327 connection? also, how can I add more PID to display in the dashboard?
11-11-2021, 02:33 PM
Is there a way to setup OPA 13 Cluster Dashboard to retrieve CAN messages directly from PiCAN interface rather than through OBDII ELM327 connection? also, how can I add more PID to display in the dashboard?
02-12-2022, 11:27 PM
(This post was last modified: 02-12-2022, 11:35 PM by chris_audi.)
Hey, its me again. I have some questions to the Controller Service for RNS-E and the supported mapped keys.
Is there any keymapping documented for these RNS-E Buttons like in the user manual for keyboard? https://bluewavestudio.io/community/show...p?tid=2208&pid=12582#pid12582 Some buttos aren't working for me linke described: ; Setup button - Toggle play // in OpenAuto it toggles play correctly // in Android Auto its next track ; Previous track button - Previous track // no function in OpenAuto? //in Android Auto it highlights the menue button? (circle) ; Next track button - Next track // in OpenAuto and Android Auto it switches between openend Applications The other buttons are working correctly. It would be a dream, if one button could be the voice trigger button for Android Auto. So i can tell the voice assistent to call someone or navigate to a location and so on. Maybe we can use the previous track key or the setup key from rns-e? Maybe you can make the keymaps changeable? In a seperate file? So we can say setup button is mapped to "m" Key on Keyboard wich is voice assistent and so on? Previous Track and next Track are not so important for me :-) Maybe i can tell the voice assistent to play the next track .. didnt tried that yet :-D I have a touchscreen installed but there could be many users without touchscreen who cant trigger the voice Assistent then. (10-29-2021, 08:24 AM)Daniel_BlueWave Wrote: Good to hear that. I understood this funktion differently. I think its starting a script if i start the reversecam in OpenAuto by starting the rear cam application on main screen. I now have a python script running in background wich is candump and waiting for reverse gear canbus message. If the reverse gear ist activated, the script is putting the stream from the cam in foreground. Maybe you could integrate this into OpenAuto, so it detects the can message for reverse gear and switching to reverse cam automatically? If you want the script, just write me :-) But its more like modified script from a other application.
02-13-2022, 09:43 AM
Here is the list of keys for RNS-E https://bluewavestudio.io/community/showthread.php?tid=2208&pid=12582#pid12582. In version 15.0 you can trigger rear camera via API. The same for the key strokes. You can write your own script that handles CAN messages of your car and then uses API to trigger some desired action.
02-13-2022, 06:10 PM
(02-13-2022, 09:43 AM)BlueWave Wrote: Here is the list of keys for RNS-E https://bluewavestudio.io/community/showthread.php?tid=2208&pid=12582#pid12582. In version 15.0 you can trigger rear camera via API. The same for the key strokes. You can write your own script that handles CAN messages of your car and then uses API to trigger some desired action. Hello, i know this list but this keys doesnt work like discribed: ; Setup button - Toggle play // in OpenAuto it toggles play correctly // in Android Auto its next track ; Previous track button - Previous track // no function in OpenAuto? // in Android Auto it highlights the menue button (circle) ; Next track button - Next track // in OpenAuto and Android Auto it switches between openend Applications I can use API ... Ok ...but the Controller Service ist predefined. Does a API command overwrite a command from Controller Service?
05-10-2022, 01:43 PM
Post about 'shutdown the PI via can bus (ignition off) command' moved: https://bluewavestudio.io/community/thre...l#pid17902
10-16-2022, 10:20 PM
(11-11-2021, 02:33 PM)wkl3968 Wrote: Is there a way to setup OPA 13 Cluster Dashboard to retrieve CAN messages directly from PiCAN interface rather than through OBDII ELM327 connection? also, how can I add more PID to display in the dashboard? im interested too ... does anyone has made this work? i think i saw some guys on youtube that made this work with canbus. |
|