My setup:
- Raspberry Pi 3B (also tested with RPi-2B)
- 16GB MiroSD (also tested with 8gb & 32gb)
- 1024x600 Touchscreen
- 5V 3A power supply (also tested with 5V 5A)
- USB External sound card with microphone input
- USB Bluetooth adapter (tested with and without)
When I load my image onto the SD card and boot it up, I am only greeted with the Raspbian desktop, and sometimes see a small window for a split second with "Open Auto Pro" on it, which quickly disappears. I try to execute the "openauto" script on the desktop, which does nothing.
As suggested on another post, I used my "config.txt" file from a working Rapbian + OA build I did in place of the OpenAutoPro config.txt and it still does not work.
Any help would be appreciated.
- Raspberry Pi 3B (also tested with RPi-2B)
- 16GB MiroSD (also tested with 8gb & 32gb)
- 1024x600 Touchscreen
- 5V 3A power supply (also tested with 5V 5A)
- USB External sound card with microphone input
- USB Bluetooth adapter (tested with and without)
When I load my image onto the SD card and boot it up, I am only greeted with the Raspbian desktop, and sometimes see a small window for a split second with "Open Auto Pro" on it, which quickly disappears. I try to execute the "openauto" script on the desktop, which does nothing.
As suggested on another post, I used my "config.txt" file from a working Rapbian + OA build I did in place of the OpenAutoPro config.txt and it still does not work.
Any help would be appreciated.