03-15-2019, 01:35 PM
What is the "lightest" software to use for this?
Use gpio to trigger?
03-15-2019, 01:35 PM
What is the "lightest" software to use for this? Use gpio to trigger?
03-16-2019, 01:45 PM
03-18-2019, 09:18 AM
Do you have any date for this release?
03-18-2019, 09:45 AM
03-18-2019, 11:03 AM
Do you have any solution for muting for instance Welle, io when incoming call?
03-21-2019, 08:50 PM
For now it is not possible for us to mute it.
03-27-2019, 08:21 PM
04-02-2019, 09:17 AM
And have it call the raspivid command to run for 10 seconds (then adjust as required to what works best for me - not sure how long it normally takes to do a backup if that makes sense) raspivid -t 10000 I can then push the button from the launcher, which will then give me a reverse camera. I havn't tried this, but can't see why it shouldn't work. The messing with the GPIO taking the 12v from the reverse lights and stepping it down to 3.3v is too hard basket for now... assume will be something like this? Maybe even trigger the autostart (not sure what it does but often you turn your car on and need to reverse, so why not have it auto do it? [Application_4] Name=ReverseCam Path=/usr/bin/raspivid IconPath=/home/pi/icons/obd.png Arguments=-t 10000 Autostart=false
04-10-2019, 09:33 AM
Simple button press and bam the reverse cam overlays! i just did a quick search for an image I liked resized it to 256x256 and away I went! Still playing with getting the duration worked out [Application_5] Name=Reverse Cam Path=/usr/bin/raspivid IconPath=/home/pi/icons/icon_reverse.jpg Arguments=-v -h -t 15000
05-06-2019, 01:20 AM
Also - if anyone has any ideas how to trigger the GPIO when selecting reverse on a manual transmission vehicle, I would be very grateful! |
|