09-11-2021, 04:08 PM
System requirements:
a. What is the version of your RPI? - Pi 4 4GB
b. Power supply details - 5v USB standard
c. Model of external sound card - https://www.amazon.com/gp/product/B07RV6VBNR
d. Do you have microphone input? - No
e. Details of your Bluetooth dongle. - https://www.amazon.com/gp/product/B07QL7C6WG
f. Touchscreen model - Official RPi 7" Touchscreen
2. Android Auto:
a. Which version of Android Auto have you installed on your phone? 6.7.612934
b. Model of your phone. - LG V60
3. Steps to reproduce your issue
My issue isn't in Android Auto itself, but rather with the OAP GUI. See attached photo - the top of the screen, including pull-down bar, clock, etc. are almost completely cut off. Oddly, the actual RPi OS desktop and Android Auto are totally normal with perfect margins. It only happens in the OAP application GUI itself. Also the calibration is different from the RPi OS desktop; I have to tap almost an inch above anything I want to press, and it gets worse the further down the screen you go. It started a couple updates ago, since version 12; I have 13.1 now and it's still an issue. Unfortunately this means I can't adjust my screen brightness in any way, which is bad because I don't have a light sensor installed yet.
I have never modified my screen config nor plugged in any external monitor since building my Pi project box in March 2020 and started using OAP (version 5 or 6 at the time). Seems like a configuration issue in OAP itself since the desktop is fine?
a. What is the version of your RPI? - Pi 4 4GB
b. Power supply details - 5v USB standard
c. Model of external sound card - https://www.amazon.com/gp/product/B07RV6VBNR
d. Do you have microphone input? - No
e. Details of your Bluetooth dongle. - https://www.amazon.com/gp/product/B07QL7C6WG
f. Touchscreen model - Official RPi 7" Touchscreen
2. Android Auto:
a. Which version of Android Auto have you installed on your phone? 6.7.612934
b. Model of your phone. - LG V60
3. Steps to reproduce your issue
My issue isn't in Android Auto itself, but rather with the OAP GUI. See attached photo - the top of the screen, including pull-down bar, clock, etc. are almost completely cut off. Oddly, the actual RPi OS desktop and Android Auto are totally normal with perfect margins. It only happens in the OAP application GUI itself. Also the calibration is different from the RPi OS desktop; I have to tap almost an inch above anything I want to press, and it gets worse the further down the screen you go. It started a couple updates ago, since version 12; I have 13.1 now and it's still an issue. Unfortunately this means I can't adjust my screen brightness in any way, which is bad because I don't have a light sensor installed yet.
I have never modified my screen config nor plugged in any external monitor since building my Pi project box in March 2020 and started using OAP (version 5 or 6 at the time). Seems like a configuration issue in OAP itself since the desktop is fine?