06-01-2021, 06:13 PM

I am new to OpenAuto and have been trying to change the dashboard section to fit my needs. I have changed the files, rebooted, but all I get is an empty dashboard screen with no "dashes" to choose from. Leading me to believe there is an error in my config. Below are my files (they are in their correct files, not just one file as shown for ease of uploading). Any help would be appreciated!

```
dashboards.ini
[ObdDashboard]
Count=1
[ObdDashboard_0]
Name=Sport
Title=Sport Dashboard
Type=0
GaugeIndex_0=1
GaugeIndex_1=2
GaugeIndex_2=3
GaugeIndex_3=4
GaugeIndex_4=5
pids.ini
[ObdPids]
Count=7
[ObdPid_0]
Query=010D
Formula=a
[ObdPid_1]
Query=010C
Formula=(256*a+b)/4
[ObdPid_2]
Query=010F
Formula=a-40
[ObdPid_3]
Query=0145
Formula=(100/255)*a
[ObdPid_4]
Query=015C
Formula=a-40
[ObdPid_5]
Query=015E
Formula=((256*a)+b)/20
[ObdPid_6]
Query=0133
Formula=a
[ObdPid_7]
Query=010B
Formula=a
gauges.ini
[ObdGauges]
Count=7
[ObdGauge_0]
MinValue=0
MaxValue=140
Limit=120
Formula=getPidValue(0)*0.621371
Label=MPH
Precision=0
[ObdGauge_1]
MinValue=0
MaxValue=5000
Limit=4700
Formula=getPidValue(1)
Label=RPM
Precision=0
[ObdGauge_2]
MinValue=0
MaxValue=30
Limit=0
Formula=getPidValue(2)
Label=Fuel kPa
Precision=0
[ObdGauge_3]
MinValue=0
MaxValue=255
Limit=0
Formula=getPidValue(3)
Label=*C
Precision=0
[ObdGauge_4]
MinValue=0
MaxValue=100
Limit=0
Formula=getPidValue(4)
Label=Throttle %
Precision=0
[ObdGauge_5]
MinValue=0
MaxValue=300
Limit=250
Formula=getPidValue(5)
Label=L/h
Precision=0
[ObdGauge_6]
MinValue=0
MaxValue=30
Limit=0
Formula=(getPidValue(7)-getPidValue(6))/0.145038
Label=psi
Precision=1
```