06-27-2021, 07:08 PM
(This post was last modified: 06-28-2021, 08:21 AM by Daniel_BlueWave.)
Hi all, I apologize for the ignorance. But I have no idea what I'm doing or doing wrong.
Current setup:
Raspberry Pi 4
FORScan ELM327 OBD2 USB adapter
Vehicle is 2004 Nissan 350Z
I have the settings set according to post: https://bluewavestudio.io/community/show...p?tid=2045
"1. Connect your ELM327 adapter to the Raspberry PI
2. Figure out the descriptor of you adapter (usually it is /dev/ttyUSB0)
3. In /home/pi/.openauto/config/openauto_system.ini file adjust below parameters to
3.1. ObdDeviceType=1
3.2. ObdAdapterDescriptor=/dev/ttyUSB0
3.3. ObdAdapterBaudrate=115200
4. Restart your Raspberry PI"
I don't know what to do. I'm not getting anything from the adapter and I'm totally in new territory and not even sure the beginnings of how to troubleshoot. Because I'm new at this, I need to be treated like a child and have my hand held through the process of solving this...
I've also tried to read through the forums and either cannot find the right information, or I am so clueless on what I'm doing I'm staring at the answer and don't even realize it.
Thanks in advance.
Current setup:
Raspberry Pi 4
FORScan ELM327 OBD2 USB adapter
Vehicle is 2004 Nissan 350Z
I have the settings set according to post: https://bluewavestudio.io/community/show...p?tid=2045
"1. Connect your ELM327 adapter to the Raspberry PI
2. Figure out the descriptor of you adapter (usually it is /dev/ttyUSB0)
3. In /home/pi/.openauto/config/openauto_system.ini file adjust below parameters to
3.1. ObdDeviceType=1
3.2. ObdAdapterDescriptor=/dev/ttyUSB0
3.3. ObdAdapterBaudrate=115200
4. Restart your Raspberry PI"
I don't know what to do. I'm not getting anything from the adapter and I'm totally in new territory and not even sure the beginnings of how to troubleshoot. Because I'm new at this, I need to be treated like a child and have my hand held through the process of solving this...
I've also tried to read through the forums and either cannot find the right information, or I am so clueless on what I'm doing I'm staring at the answer and don't even realize it.
Thanks in advance.