10-05-2020, 08:47 PM
Greetings to all!
If this question is answered elsewhere, please accept my apology and please (if you're able) send me a link to that answer?
Problem:
No keyboard response and limited mouse response at first-run language menu.
** Before details, Daniel from Bluewave sent me the link below, which (in short) indicates that I need to run this command: "sudo bwscursor show"
*** However (and I am new to RPi so sorry if this is a noob question) since I have the OAP language menu on my screen, I can't get to the console from the Raspian desktop's console.
Also, I searched for the RPi's IP address on my home network, and it does not show up - and I don't know how the OAP's instance of Raspian is configured.
Hardware:
RPi 4B (4GB)
Connected via USB:
Dell mouse (generic0
Dell keyboard (SK3205-has smartcard reader) but has worked with Raspian w/o issue
Connected via microSD:
Samsung 256 GB card, freshly imaged (using Etcher) with this .img:
bluewavestudio-openauto-pro-release-11.0.img
Issue:
After flashing my msdcard with the latest OAP .img file:
RPi 4B boots successfully into OAP
Language menu is displayed
The only mouse response I get is when moving the scroll-wheel up and down:
The menu does scroll, but the selected language stays on Cestina.
I get absolutely no visible response using my keyboard.
I WILL try a non-smartcard keyboard, but I don't have one usable at the moment
This exact same keyboard works without error on the most current .iso for Raspian.
Please help if able and thank you in advance!
If this question is answered elsewhere, please accept my apology and please (if you're able) send me a link to that answer?
Problem:
No keyboard response and limited mouse response at first-run language menu.
** Before details, Daniel from Bluewave sent me the link below, which (in short) indicates that I need to run this command: "sudo bwscursor show"
*** However (and I am new to RPi so sorry if this is a noob question) since I have the OAP language menu on my screen, I can't get to the console from the Raspian desktop's console.
Also, I searched for the RPi's IP address on my home network, and it does not show up - and I don't know how the OAP's instance of Raspian is configured.
Hardware:
RPi 4B (4GB)
Connected via USB:
Dell mouse (generic0
Dell keyboard (SK3205-has smartcard reader) but has worked with Raspian w/o issue
Connected via microSD:
Samsung 256 GB card, freshly imaged (using Etcher) with this .img:
bluewavestudio-openauto-pro-release-11.0.img
Issue:
After flashing my msdcard with the latest OAP .img file:
RPi 4B boots successfully into OAP
Language menu is displayed
The only mouse response I get is when moving the scroll-wheel up and down:
The menu does scroll, but the selected language stays on Cestina.
I get absolutely no visible response using my keyboard.
I WILL try a non-smartcard keyboard, but I don't have one usable at the moment
This exact same keyboard works without error on the most current .iso for Raspian.
Please help if able and thank you in advance!