09-04-2020, 10:47 PM
Alright, just bought OAP a couple days ago, thought it was crashing on me but realized the touch input is off on my Official Raspberry Pi 7" touchscreen, so when I would try and press "Accept" on the user agreement it was actually pressing "Reject" and closing to the desktop, on the desktop I also have no cursor when using a mouse. The input seems to be almost an inch to the right of where you touch on the right side of the screen, but as you get closer to the left side of the screen it gets more accurate. Once I figured this out I was able to enter my Product key and confirm that OAP does work just fine, my touch input is just completely screwed up. I found this page, https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=120260, which sounded similar to my problem, but disabling "Overscan" didn't do anything. When I try and open any window on the desktop such as the terminal or settings they are not even on screen, I think they are over on the right of the screen off of what I can see. I have tried digging for calibration scripts and programs but have not been able to get anything to work.
Here's my system spec
-Raspberry pi 3B
-The supplied power supply 5V 2.5A
-CableCreation USB Audio Adapter (https://www.amazon.com/gp/product/B01H2X...le_o00_s00? ie=UTF8&psc=1)
-It should have microphone input
-USB CSR Bluetooth 4.0 dongle (https://www.amazon.com/gp/product/B01IM8...le_o00_s00? ie=UTF8&psc=1)
-Official Raspberry Pie 7 inch Touchscreen
Here's my system spec
-Raspberry pi 3B
-The supplied power supply 5V 2.5A
-CableCreation USB Audio Adapter (https://www.amazon.com/gp/product/B01H2X...le_o00_s00? ie=UTF8&psc=1)
-It should have microphone input
-USB CSR Bluetooth 4.0 dongle (https://www.amazon.com/gp/product/B01IM8...le_o00_s00? ie=UTF8&psc=1)
-Official Raspberry Pie 7 inch Touchscreen