06-19-2020, 01:03 PM
So I have a question about the sound, power supply, because while everything is turned on (car, Raspberry, Audio Amps)
My Py is feed as follow
I have + and Ground from the Battery, this is connected to a 12v to 5v 10A Converter, Before the powerleads go directly in the pi it has a Capicator before to stabilize the current.
I use a Hifiberry as sound, but the problem I try to discribe hasn't do anything with this card cause it's with every audio card i use.
So when i turn the key of the car power goes to the converter.. i turn a switch and the pi turns on. Everything is ok!
But when I shutdown the Raspberry and the switch of i get a blurp every once a second on my speakers..
It only appears when the circuit is broken... and so a ground loop is caused...
How can I resolve this... for example if i want to take a quick drive i don't need audio nor raspberry pi to be turned on... but if i don't i get that annoying blurp al the time.
My Py is feed as follow
I have + and Ground from the Battery, this is connected to a 12v to 5v 10A Converter, Before the powerleads go directly in the pi it has a Capicator before to stabilize the current.
I use a Hifiberry as sound, but the problem I try to discribe hasn't do anything with this card cause it's with every audio card i use.
So when i turn the key of the car power goes to the converter.. i turn a switch and the pi turns on. Everything is ok!
But when I shutdown the Raspberry and the switch of i get a blurp every once a second on my speakers..
It only appears when the circuit is broken... and so a ground loop is caused...
How can I resolve this... for example if i want to take a quick drive i don't need audio nor raspberry pi to be turned on... but if i don't i get that annoying blurp al the time.