Current version of the OpenAuto Pro is 12
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remote Control
#1
I have seen this product on aliexpress and wanted to know if someone has installed a similar one or if it is very difficult to configure, it would be nice to be able to add it to my car since it comes without steering wheel controls.

It puts that in bluethoot but in the comments they say that it is not, then it would be necessary to make a script I think.

https://a.aliexpress.com/_dT2qzQs


Attached Files Thumbnail(s)
   
Reply
#2
Yes I am also wondering how to do it with those kind of controls:
https://www.amazon.de/DONGMAO-Controller-Kabellose-DVD-GPS-Navigations-Musiktaste-Fernbedienungstaste/dp/B07HFRTVGL/ref=sr_1_4?dchild=1&keywords=lenkradfernbedienung+universal&qid=1589800040&sr=8-4

I know that you need an Arduino to read the signals from the remote. But again, I am not sure which kind of signals and how to translate them into HID commands
Reply
#3
What about IR wireless remote controls?
https://www.google.com/search?q=ir+steering+wheel+remote&prmd=ivmn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiGyova2r3pAhUPmIsKHUDtAuAQ_AUoAXoECAsQAQ&biw=360&bih=657&dpr=3#imgrc=_XRJn-Y-rFr_jM

But not shure if it would be able to control OAP and AA with it. Ofcourse we would need an IR sensor connected to the raspberry pi.
https://www.adafruit.com/product/157

Not really shure if any ir remote will work or just specific remote.

But this combo would be really inexpensive.
Raspberry Pi 4b-4gb / Official 7" touchscreen / OAP 5.0 / Honor 8x (AndroidAuto 5.) / USB sound card / USB microphone
Reply
#4
Just wanted to let you know that I bought the remote control that I posted. I will use an Arduino Pro Micro as it has pins to read analog input and can act as HID.
Hopefully it will be there by tomorrow. I will post the code and wiring after finishing!
Reply
#5
Have a look in my guide if you're still interested

https://bluewavestudio.io/community/show...p?tid=1677
Reply
#6
(06-03-2020, 10:44 PM)marcb4 Wrote: Have a look in my guide if you're still interested

https://bluewavestudio.io/community/show...p?tid=1677
It looks great, I will try to do it with the one I publish because it is easier for me to integrate into the car, thank you very much for remembering me
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)