04-09-2020, 12:04 PM
(This post was last modified: 04-09-2020, 12:05 PM by WeissNicht.)
Hi there,
I´m currently setting up OpenAuto Pro für my 2006 Audi S8 with MMI2G. To do so I´m doing some bench tests at the moment.
Fantastic solution in your Audi A8 by the way; I think I´ll have more questions on your solution later on.
My current Setup:
Raspberry Pi 3
32Gb SD-Card
No Bluetooth at the moment (it´s on delivery (Asus BT400))
Logitech G35 Headset (as soundcard, USB-Soundcard is on delivery)
Smartphones tested: Blackberry Keyone, CAT S61
For the Audi I´ll use the RCA out an go via the TV-AV-Input.
First I used my TV, to as a display. Everything besides touch seems to work (Ok, my TV has no touch, Mouse is ok for testing... but not working in AA).
Today I reinstalled OpenAuto Pro (to have a clean setup) and connected my 3.5" Raspi-Touchscreen (Velleman VM400, a clone of a common Raspi-Display), connected via GPIO. And installed it as described here:
https://www.velleman.eu/downloads/29/vmp400_a4v03.pdf
Now Android-Auto is always giving me a black screen. Same setup as on my TV, only the Touch-Screen is different. Only AA is black, the other parts of OpenAuto Pro seem to work (didn´t test mirroring)
When I switch back to output on the TV, everything works as expected; the only change is the display.
I would like to be able, to take the Raspi inside and use the Raspi-Display, while experimenting with it and not to be bound to my car. When the digitizer arrives, I´ll put all of it in the car, so, this is just a minor issue for me, but if there is an easy solution, I would be happy ;-).
Regards,
Dennis
I´m currently setting up OpenAuto Pro für my 2006 Audi S8 with MMI2G. To do so I´m doing some bench tests at the moment.
Fantastic solution in your Audi A8 by the way; I think I´ll have more questions on your solution later on.
My current Setup:
Raspberry Pi 3
32Gb SD-Card
No Bluetooth at the moment (it´s on delivery (Asus BT400))
Logitech G35 Headset (as soundcard, USB-Soundcard is on delivery)
Smartphones tested: Blackberry Keyone, CAT S61
For the Audi I´ll use the RCA out an go via the TV-AV-Input.
First I used my TV, to as a display. Everything besides touch seems to work (Ok, my TV has no touch, Mouse is ok for testing... but not working in AA).
Today I reinstalled OpenAuto Pro (to have a clean setup) and connected my 3.5" Raspi-Touchscreen (Velleman VM400, a clone of a common Raspi-Display), connected via GPIO. And installed it as described here:
https://www.velleman.eu/downloads/29/vmp400_a4v03.pdf
Now Android-Auto is always giving me a black screen. Same setup as on my TV, only the Touch-Screen is different. Only AA is black, the other parts of OpenAuto Pro seem to work (didn´t test mirroring)
When I switch back to output on the TV, everything works as expected; the only change is the display.
I would like to be able, to take the Raspi inside and use the Raspi-Display, while experimenting with it and not to be bound to my car. When the digitizer arrives, I´ll put all of it in the car, so, this is just a minor issue for me, but if there is an easy solution, I would be happy ;-).
Regards,
Dennis