I have the Pi 4 Model B (2GB) with the 7inch touchscreen and openauto pro. I made the image and put the sd in and the pi turns on but nothing pops up on the touch screen. help?!?!
02-22-2020, 06:13 AM
How did you connect touchscreen with the rpi4b?
How do you power rpi4b and how do you power touchscreen? What is your power supply? Did you try it with stock raspbian buster? What OpenAuto Pro version do you use?
Raspberry Pi 4b-4gb / Official 7" touchscreen / OAP 5.0 / Honor 8x (AndroidAuto 5.) / USB sound card / USB microphone
02-23-2020, 01:05 AM
(02-22-2020, 06:13 AM)skrimo Wrote: How did you connect touchscreen with the rpi4b?I tried connecting it a couple different ways no luck, i tried seperate power supplies for each item and a combined one with no luck. I have a USB C cable to the wall to test at the moment. The touch screen works with the stock raspbian buster. I bought the new OpenAuto Pro over the weekend
02-23-2020, 01:24 AM
(This post was last modified: 02-23-2020, 07:10 AM by Daniel_BlueWave.)
Please post complete list od components that you are using (brands, models). Without that we are unable to help you. Official Pi Foundation 7'' display works out of the box. What touchscreen do you use?
https://bluewavestudio.io/community/show...p?tid=1385
02-23-2020, 06:20 PM
System requirements:
a. What is the version of your RPI? PI 4 Model B 2GB b. Power supply details Currently using a regular USB-C Cable with an apple block. c. Model of external sound card: no external sound card ATM d. Do you have microphone input? no mic input ATM e. Details of your Bluetooth dongle. no bluetooth dongle ATM f. Touchscreen model Official Pi Foundation 7'' display
02-23-2020, 06:25 PM
In order to run OpenAuto Pro you must have external sound card, microphone input and external Bluetooth dongle. Otherwise behavior is undefined.
What OpenAuto Pro version do you use?
02-23-2020, 06:31 PM
I have all 3, just havent connected it because i was unable to even get it to turn on the screen. and i have the newest one. i bought it last week
02-23-2020, 06:51 PM
Please connect all required devices and answer what version of OpenAuto Pro are you flashing on the SD card and what flashing software do you use.
02-23-2020, 06:56 PM
Im using 6.1 and etcher
02-23-2020, 06:58 PM
If your PI does not boot after flashing the image, something might went wrong during image downloading. Please try to redownload the image and reflash your SD card.
|
|