01-03-2020, 12:58 PM
(This post was last modified: 01-03-2020, 03:47 PM by Daniel_BlueWave.)
Hello, I am a trying to get the OAP working on a touchscreen I got from amazon.
I have boot the program up on a monitor and it works fine with the same cable I am using with the touchscreen, so the problem it's not in the cable or in the program, and I have done other projects on this touchscreen so it is not damaged either.
https://www.amazon.com/SunFounder-Raspbe...B07Y889J3X
This is the touchscreen I have.
To try to fix the issue I went into the SD card and in the config.txt, so i added this code after the
#DMT (computer monitor) modes
#hdmi_drive=2
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
It is still not working and I would like it to work.
Thanks for your help.
Now it made everything bigger on my monitor but it still not working on the touchscreen.
I have boot the program up on a monitor and it works fine with the same cable I am using with the touchscreen, so the problem it's not in the cable or in the program, and I have done other projects on this touchscreen so it is not damaged either.
https://www.amazon.com/SunFounder-Raspbe...B07Y889J3X
This is the touchscreen I have.
To try to fix the issue I went into the SD card and in the config.txt, so i added this code after the
#DMT (computer monitor) modes
#hdmi_drive=2
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
It is still not working and I would like it to work.
Thanks for your help.
(01-03-2020, 12:58 PM)Hernangarqui Wrote: Hello, I am a trying to get the OAP working on a touchscreen I got from amazon.
I have boot the program up on a monitor and it works fine with the same cable I am using with the touchscreen, so the problem it's not in the cable or in the program, and I have done other projects on this touchscreen so it is not damaged either.
https://www.amazon.com/SunFounder-Raspbe...B07Y889J3X
This is the touchscreen I have.
To try to fix the issue I went into the SD card and in the config.txt, so i added this code after the
#DMT (computer monitor) modes
#hdmi_drive=2
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
It is still not working and I would like it to work.
Thanks for your help.
Now it made everything bigger on my monitor but it still not working on the touchscreen.