09-25-2019, 02:52 PM
(09-25-2019, 02:40 PM)BlueWave Wrote:i have the same issue... V4L2:///dev/video seems to be the parameter and i have that in the config file but doesnt trigger the camera... when i run DISPLAY=0: cvlc v4l2:///dev/video0 from the command line i do get the video feed on the HDMI display(09-25-2019, 02:27 PM)officialgrantd Wrote:(09-25-2019, 02:23 PM)BlueWave Wrote:I have RC1. I looked at the config file and it is set to /dev/video0 as expected. It works in VLC but not in OAP(09-25-2019, 02:19 PM)officialgrantd Wrote:(09-21-2019, 01:03 PM)Daniel_BlueWave Wrote: "Plug and Play or easy to configure." - this is Linux. Are you able to configure your camera in Raspbian OS? You should ask manufacturer for more information how to do that.The camera works in VLC with my Easy Cap device. I open "Capture Device" and set the "Video device name" to /dev/video0 and it works fine. What settings do I need to change to get it to work in Open Auto?
In RC1 version there is an entry in openauto_system.ini file to set name of the device. /dev/video0 is the default one so it might not be necessary to edit config file at all.
Please put the same parameters as for VLC.