Raspbian/OAP not filling screen - Printable Version +- BlueWave Studio forum (https://bluewavestudio.io/community) +-- Forum: OpenAuto Pro (https://bluewavestudio.io/community/forum-86.html) +--- Forum: User interface (https://bluewavestudio.io/community/forum-66.html) +--- Thread: Raspbian/OAP not filling screen (/thread-722.html) |
Raspbian/OAP not filling screen - BryWr - 03-12-2019 I have a 7" touchscreen (800x480) and just switched to OAP (loving it). When I am in Raspbian/OAP, the interface does not fill the entire screen, yet touches register as if it was filled. This caused me to have to touch about a fingertip above/below the desired action. Such as if I want to hit the "HOME (circle) button in OAP, I have to touch the blank space below it for the touch to register. Or if I want to get into the Raspbian menu, I have to touch just above it. When I am in AndroidAuto, however, everything is perfect, The screen gets filled and all touches are registered properly. By no means, not unusable, but it would be nice to fix. I have a few pics as reference, one has a red mark for where I have to touch for a certain action, a yellow line for screen edge, and a blue for the actual edge. Any help is greatly appreciated! TIA! Re: Raspbian/OAP not filling screen - BlueWave - 03-12-2019 Could you please post a vendor of your screen? It looks like you need to adjust overscan settings. Please take a look at this page Parameters that you need to adjust are
Re: Raspbian/OAP not filling screen - BryWr - 03-12-2019 The overscan settings worked. I set all 4 parameters to "-32" and it's perfect now. My touchscreen is: |