RNS-E (800x480) alignment - Printable Version

RNS-E (800x480) alignment - Printable Version

+- BlueWave Studio forum (https://bluewavestudio.io/community)
+-- Forum: OpenAuto Pro (https://bluewavestudio.io/community/forum-86.html)
+--- Forum: User interface (https://bluewavestudio.io/community/forum-66.html)
+--- Thread: RNS-E (800x480) alignment (/thread-3596.html)

RNS-E (800x480) alignment - WilQ - 10-20-2022

I'm using RCA and struggling with correct alignment.
Used many file from this forum, here are two of them:

- first one:

overscan_left=-15
overscan_right=-40
overscan_top=-55
overscan_bottom=-40
framebuffer_width=800
framebuffer_height=480
sdtv_aspect=3

overscan_scale=1

- below, my config (aspect 15:9 as it's same as 800/480):

overscan_bottom=-40
framebuffer_width=800
framebuffer_height=480
sdtv_aspect=6

overscan_scale=1

RE: RNS-E (800x480) alignment - BlueWave - 10-21-2022

Please post more details how did you connect the Pi to your screen?

RE: RNS-E (800x480) alignment - WilQ - 10-21-2022

Raspberry Pi -> Composite (yellow) cinch [soldered straight to the Raspberry PCB] -> AV input of Audi TV Tuner [4D0 919 146 D]

RE: RNS-E (800x480) alignment - BlueWave - 10-21-2022

As far as we know Composite output has some problems with overscan settings. Overscan is part of the Raspberry PI OS firmware. You can try to post your problem at https://forums.raspberrypi.com/.

RE: RNS-E (800x480) alignment - WilQ - 10-22-2022

[Image: 2-C0372-D6-C50-F-4-B0-C-A58-B-300-B76-D81-FD8.jpg]

Converter Faulty so No color, but on HDMI it still getting cropped from right.

RE: RNS-E (800x480) alignment - BlueWave - 10-22-2022

Try to toggle PAL/NTSC settings on your converter.

Now, with HDMI converter, you must find correct overscan settings for your screen.