BlueWave Studio forum
Navigating without a touch screen - Printable Version

+- BlueWave Studio forum (https://bluewavestudio.io/community)
+-- Forum: OpenAuto Pro (https://bluewavestudio.io/community/forum-86.html)
+--- Forum: Installation and Upgrades Support (https://bluewavestudio.io/community/forum-93.html)
+--- Thread: Navigating without a touch screen (/thread-3155.html)



Navigating without a touch screen - KingK - 01-14-2022

Finally got this to boot after about 7 attempts to download, several SD cards only to find one of the download links was downloading a faulty image file.

So I'm at the language select page and that's it. How do I select a language if the touch screen isn't working?
Set up is Pi3b, 7" Resistive Touch Screen LCD, 1024×600

I did somehow have it select Danish and went to the next screen but I couldn't get it to do anything else
I didn't want to have to learn Danish so I re imaged the SD card and now back to the language select page.

Can a keyboard and mouse be used for initial setup? Plugged them in don't work.

I find a lack of simple step by step setup/startup instructions very frustrating or am I missing something and there is such a document?


RE: Touch screen - BlueWave - 01-14-2022

The best starting point would be Docs section at https://www.bluewavestudio.io/community/forumdisplay.php?fid=104

In order to control OpenAuto Pro interface by keyboard, please read supported key strokes thread at https://www.bluewavestudio.io/community/showthread.php?tid=2048


RE: Touch screen - KingK - 01-15-2022

(01-14-2022, 11:28 PM)BlueWave Wrote: The best starting point would be Docs section at https://www.bluewavestudio.io/community/forumdisplay.php?fid=104

In order to control OpenAuto Pro interface by keyboard, please read supported key strokes thread at https://www.bluewavestudio.io/community/showthread.php?tid=2048

With a keyboard attached I press the down arrow and the top language is then highlighted but I can not move to another language.


RE: Touch screen - BlueWave - 01-15-2022

(01-15-2022, 01:37 AM)KingK Wrote:
(01-14-2022, 11:28 PM)BlueWave Wrote: The best starting point would be Docs section at https://www.bluewavestudio.io/community/forumdisplay.php?fid=104

In order to control OpenAuto Pro interface by keyboard, please read supported key strokes thread at https://www.bluewavestudio.io/community/showthread.php?tid=2048

With a keyboard attached I press the down arrow and the top language is then highlighted but I can not move to another language.

Quote:1 - Scroll/rotate left
2 - Scroll/rotate right

Use 1 and 2 key strokes to scroll through elements on the screen.