BlueWave Studio forum
Volume slider disabled with sound card on OAP 6.1 [SOLVED] - Printable Version

+- BlueWave Studio forum (https://bluewavestudio.io/community)
+-- Forum: OpenAuto Pro (https://bluewavestudio.io/community/forum-86.html)
+--- Forum: Audio features (https://bluewavestudio.io/community/forum-63.html)
+--- Thread: Volume slider disabled with sound card on OAP 6.1 [SOLVED] (/thread-1531.html)

Pages: 1 2


Volume slider disabled with sound card on OAP 6.1 [SOLVED] - lemuertdmamt - 03-22-2020

Hello everyone,

My volume slider is disabled and it is set to 0 but the sound and the mic still work well. I’m running OAP 6.1 and I’m using this sound card USB:

https://www.amazon.it/Techrise-adattatore-convertitore-controllo-necessità/dp/B01J3QGU50/ref=sr_1_3?__mk_it_IT=ÅMÅŽÕÑ&crid=2XH1RNG7K198O&keywords=scheda+audio+usb&qid=1584880671&sprefix=scheda+audio%2Caps%2C183&sr=8-3


This is the output of amixer:

amixer: Mixer attach default error: Invalid argument

This is the output of sudo amixer scontrols -c 1:

Simple mixer control 'Speaker',0
Simple mixer control 'Mic',0

This is the output of lsusb:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 011: ID 0c76:161f JMTek, LLC. 
Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 010: ID 0eef:0005 D-WAV Scientific Co., Ltd 
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

This is the output oaplay -Ll:

null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
pulse
    PulseAudio Sound Server
default
output
sysdefault:CARD=Device
    USB PnP Audio Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Front speakers
surround21:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Direct sample mixing device
dsnoop:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Direct sample snooping device
hw:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Hardware device with all software conversions
usbstream:CARD=Device
    USB PnP Audio Device
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 1: Device [USB PnP Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
 
This is the output odmesg:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.97-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1294 SMP Thu Jan 30 13:21:14 GMT 2020
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
[    0.000000] On node 0 totalpages: 966656
[    0.000000]   DMA zone: 1728 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 770048 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632
[    0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 964928
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M cma=256M video=HDMI-A-1:640x480M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:6E:75:A2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty3 consoleblank=0 loglevel=0 root=PARTUUID=38df017e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash logo.nologo vt.global_cursor_default=0 plymouth.ignore-serial-consoles
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 3552864K/3866624K available (8192K kernel code, 687K rwdata, 2408K rodata, 2048K init, 850K bss, 51616K reserved, 262144K cma-reserved, 3080192K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   ( 688 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 851 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 28692 entries in 85 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000018] Switching to timer-based delay loop, resolution 18ns
[    0.000241] Console: colour dummy device 80x30
[    0.000265] console [tty3] enabled
[    0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.000328] pid_max: default: 32768 minimum: 301
[    0.000600] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000617] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001380] CPU: Testing write buffer coherency: ok
[    0.001795] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002448] Setting up static identity map for 0x200000 - 0x20003c
[    0.002606] rcu: Hierarchical SRCU implementation.
[    0.003472] smp: Bringing up secondary CPUs ...
[    0.004286] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005234] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.006135] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.006273] smp: Brought up 1 node, 4 CPUs
[    0.006286] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.006296] CPU: All CPU(s) started in HYP mode.
[    0.006305] CPU: Virtualization extensions available.
[    0.007083] devtmpfs: initialized
[    0.017701] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.017903] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017922] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.025416] pinctrl core: initialized pinctrl subsystem
[    0.026285] NET: Registered protocol family 16
[    0.029365] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.030935] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.030945] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.031147] Serial: AMBA PL011 UART driver
[    0.034359] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.050040] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-01-30 13:51, variant start_x
[    0.060055] raspberrypi-firmware soc:firmware: Firmware hash is 8f792e011c8a0ea3c5d47e7cc10172cc10b93c09
[    0.103079] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.106290] vgaarb: loaded
[    0.106654] SCSI subsystem initialized
[    0.106850] usbcore: registered new interface driver usbfs
[    0.106902] usbcore: registered new interface driver hub
[    0.106977] usbcore: registered new device driver usb
[    0.108354] clocksource: Switched to clocksource arch_sys_counter
[    0.187005] VFS: Disk quotas dquot_6.6.0
[    0.187091] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.187235] FS-Cache: Loaded
[    0.187417] CacheFiles: Loaded
[    0.187961] simple-framebuffer 3eace000.framebuffer: framebuffer at 0x3eace000, 0x12c000 bytes, mapped to 0x(ptrval)
[    0.187976] simple-framebuffer 3eace000.framebuffer: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    0.189942] Console: switching to colour frame buffer device 80x30
[    0.191490] simple-framebuffer 3eace000.framebuffer: fb0: simplefb registered!
[    0.200668] NET: Registered protocol family 2
[    0.201336] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.201362] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.201433] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.201504] TCP: Hash tables configured (established 8192 bind 8192)
[    0.201627] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.201657] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.201869] NET: Registered protocol family 1
[    0.202440] RPC: Registered named UNIX socket transport module.
[    0.202450] RPC: Registered udp transport module.
[    0.202459] RPC: Registered tcp transport module.
[    0.202469] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.202483] PCI: CLS 0 bytes, default 64
[    0.205685] Initialise system trusted keyrings
[    0.205851] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.214914] FS-Cache: Netfs 'nfs' registered for caching
[    0.215435] NFS: Registering the id_resolver key type
[    0.215457] Key type id_resolver registered
[    0.215467] Key type id_legacy registered
[    0.215491] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.217753] Key type asymmetric registered
[    0.217763] Asymmetric key parser 'x509' registered
[    0.217873] bounce: pool size: 64 pages
[    0.217916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.218083] io scheduler noop registered
[    0.218094] io scheduler deadline registered (default)
[    0.218259] io scheduler cfq registered
[    0.218270] io scheduler mq-deadline registered (default)
[    0.218280] io scheduler kyber registered
[    0.249687] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
[    0.249708] brcm-pcie fd500000.pcie: could not get clock
[    0.249769] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.249805] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
[    0.318384] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[    0.318659] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.318675] pci_bus 0000:00: root bus resource [bus 00-01]
[    0.318692] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.318735] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.318876] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.321619] PCI: bus0: Fast back to back transfers disabled
[    0.321636] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.321848] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.321969] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.322289] pci 0000:01:00.0: PME# supported from D0 D3cold
[    0.325048] PCI: bus1: Fast back to back transfers disabled
[    0.325064] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[    0.325111] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.325130] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.325201] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.325218] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.325435] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    0.325605] pcieport 0000:00:00.0: Signaling PME with IRQ 55
[    0.325762] pcieport 0000:00:00.0: AER enabled with IRQ 55
[    0.325930] pci 0000:01:00.0: enabling device (0140 -> 0142)
[    0.328638] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.330543] iproc-rng200 fe104000.rng: hwrng registered
[    0.330766] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.331274] vc-sm: Videocore shared memory driver
[    0.331678] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    0.341895] brd: module loaded
[    0.351536] loop: module loaded
[    0.352295] Loading iSCSI transport class v2.0-870.
[    0.353990] libphy: Fixed MDIO Bus: probed
[    0.354413] bcmgenet fd580000.genet: failed to get enet clock
[    0.354430] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[    0.354447] bcmgenet fd580000.genet: failed to get enet-wol clock
[    0.354463] bcmgenet fd580000.genet: failed to get enet-eee clock
[    0.354486] bcmgenet: Skipping UMAC reset
[    0.354734] unimac-mdio unimac-mdio.-19: DMA mask not set
[    0.378380] libphy: bcmgenet MII bus: probed
[    0.418902] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[    0.419792] usbcore: registered new interface driver r8152
[    0.419857] usbcore: registered new interface driver lan78xx
[    0.419910] usbcore: registered new interface driver smsc95xx
[    0.420215] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.420246] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.422464] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[    0.422782] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 56
[    0.423627] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.423641] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.423654] usb usb1: Product: xHCI Host Controller
[    0.423665] usb usb1: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd
[    0.423676] usb usb1: SerialNumber: 0000:01:00.0
[    0.424190] hub 1-0:1.0: USB hub found
[    0.424269] hub 1-0:1.0: 1 port detected
[    0.424738] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.424767] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.424786] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    0.425154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    0.425168] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.425180] usb usb2: Product: xHCI Host Controller
[    0.425191] usb usb2: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd
[    0.425202] usb usb2: SerialNumber: 0000:01:00.0
[    0.425697] hub 2-0:1.0: USB hub found
[    0.425754] hub 2-0:1.0: 4 ports detected
[    0.426945] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.427143] dwc_otg: FIQ enabled
[    0.427152] dwc_otg: NAK holdoff enabled
[    0.427160] dwc_otg: FIQ split-transaction FSM enabled
[    0.427173] Module dwc_common_port init
[    0.427377] usbcore: registered new interface driver uas
[    0.427475] usbcore: registered new interface driver usb-storage
[    0.427647] mousedev: PS/2 mouse device common for all mice
[    0.428884] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.430357] sdhci: Secure Digital Host Controller Interface driver
[    0.430367] sdhci: Copyright(c) Pierre Ossman
[    0.430761] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.431152] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.434247] ledtrig-cpu: registered to indicate activity on CPUs
[    0.434405] hidraw: raw HID events driver (C) Jiri Kosina
[    0.434524] usbcore: registered new interface driver usbhid
[    0.434533] usbhid: USB HID core driver
[    0.435314] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.437063] [vc_sm_connected_init]: start
[    0.446276] [vc_sm_connected_init]: end - returning 0
[    0.447446] Initializing XFRM netlink socket
[    0.447474] NET: Registered protocol family 17
[    0.447573] Key type dns_resolver registered
[    0.447995] Registering SWP/SWPB emulation handler
[    0.448633] registered taskstats version 1
[    0.448650] Loading compiled-in X.509 certificates
[    0.455532] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.455594] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[    0.455653] console [ttyAMA0] enabled
[    0.460760] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.461303] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[    0.461943] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    0.461955] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    0.488006] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
[    0.488096] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
[    0.507362] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.508975] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.510582] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.513461] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.515066] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.521061] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    0.523435] of_cfs_init
[    0.523597] of_cfs_init: OK
[    0.524566] Waiting for root device PARTUUID=38df017e-02...
[    0.569004] random: fast init done
[    0.620984] mmc1: new high speed SDIO card at address 0001
[    0.623487] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    0.624646] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
[    0.626934]  mmcblk0: p1 p2
[    0.642937] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    0.642948] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    0.788395] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.808703] EXT4-fs (mmcblk0p2): recovery complete
[    0.810669] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    0.810717] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    0.812450] devtmpfs: mounted
[    0.820123] Freeing unused kernel memory: 2048K
[    0.820369] Run /sbin/init as init process
[    0.971035] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    0.971049] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.971061] usb 1-1: Product: USB2.0 Hub
[    0.972948] hub 1-1:1.0: USB hub found
[    0.973274] hub 1-1:1.0: 4 ports detected
[    1.222286] systemd[1]: System time before build time, advancing clock.
[    1.298417] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
[    1.310560] NET: Registered protocol family 10
[    1.311783] Segment Routing with IPv6
[    1.349769] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    1.350456] systemd[1]: Detected architecture arm.
[    1.359940] systemd[1]: Set hostname to <raspberrypi>.
[    1.361846] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    1.435550] usb 1-1.1: New USB device found, idVendor=0eef, idProduct=0005, bcdDevice= 2.00
[    1.435566] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.435579] usb 1-1.1: Product: WS170120
[    1.435591] usb 1-1.1: Manufacturer: WaveShare
[    1.435603] usb 1-1.1: SerialNumber: bó967493657
[    1.447607] input: WaveShare WS170120 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0005.0001/input/input0
[    1.448029] hid-generic 0003:0EEF:0005.0001: input,hidraw0: USB HID v1.10 Device [WaveShare WS170120] on usb-0000:01:00.0-1.1/input0
[    1.487512] uart-pl011 fe201000.serial: no DMA platform data
[    1.548442] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[    1.687809] usb 1-1.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    1.687824] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.687837] usb 1-1.3: Product: CSR8510 A10
[    1.788434] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd
[    1.965098] usb 1-1.4: New USB device found, idVendor=8086, idProduct=0808, bcdDevice= 1.00
[    1.965113] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.965125] usb 1-1.4: Product: USB PnP Sound Device
[    1.965137] usb 1-1.4: Manufacturer: C-Media Electronics Inc.      
[    1.974102] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:8086:0808.0002/input/input1
[    2.048617] hid-generic 0003:8086:0808.0002: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:01:00.0-1.4/input3
[    2.094125] random: systemd: uninitialized urandom read (16 bytes read)
[    2.127467] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    2.127570] random: systemd: uninitialized urandom read (16 bytes read)
[    2.127921] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.128168] random: systemd: uninitialized urandom read (16 bytes read)
[    2.128757] systemd[1]: Listening on Syslog Socket.
[    2.134089] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    2.134612] systemd[1]: Listening on udev Kernel Socket.
[    2.136006] systemd[1]: Created slice system-getty.slice.
[    2.289655] i2c /dev entries driver
[    2.793778] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    2.910200] systemd-journald[100]: Received request to flush runtime journal from PID 1
[    3.479425] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[    3.482111] Driver for 1-wire Dallas network protocol.
[    3.484706] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[    3.492324] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    3.494307] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    3.494324] [vc_sm_connected_init]: start
[    3.497011] gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[    3.499599] [vc_sm_connected_init]: installed successfully
[    3.506332] media: Linux media interface: v0.10
[    3.514075] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[    3.520468] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[    3.542502] videodev: Linux video capture interface: v2.00
[    3.576454] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    3.610621] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    3.651956] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    3.882668] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.935750] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    3.935769] checking generic (3eace000 12c000) vs hw (0 ffffffffffffffff)
[    3.935779] fb: switching to vc4drmfb from simple
[    3.935898] Console: switching to colour dummy device 80x30
[    3.940816] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[    3.940832] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.940845] [drm] No driver support for vblank timestamp query.
[    3.940856] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[    3.962977] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    4.027472] Bluetooth: Core ver 2.22
[    4.027547] NET: Registered protocol family 31
[    4.027557] Bluetooth: HCI device and connection manager initialized
[    4.027578] Bluetooth: HCI socket layer initialized
[    4.027595] Bluetooth: L2CAP socket layer initialized
[    4.027645] Bluetooth: SCO socket layer initialized
[    4.036790] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.060670] usbcore: registered new interface driver btusb
[    4.102200] brcmfmac: F1 signature read @0x18000000=0x15264345
[    4.118731] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    4.119368] usbcore: registered new interface driver brcmfmac
[    4.156959] Console: switching to colour frame buffer device 80x30
[    4.176525] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[    4.221247] input: WaveShare WS170120 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0005.0001/input/input2
[    4.222928] hid-multitouch 0003:0EEF:0005.0001: input,hidraw0: USB HID v1.10 Device [WaveShare WS170120] on usb-0000:01:00.0-1.1/input0
[    4.244323] usbcore: registered new interface driver snd-usb-audio
[    4.249498] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    4.249537] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    4.255633] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    4.255664] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    4.262072] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    4.262210] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    4.392568] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    4.406301] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[    4.997262] rtc-ds1307 1-0068: registered as rtc0
[    6.263314] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search.
[    6.761493] random: crng init done
[    6.761509] random: 7 urandom warning(s) missed due to ratelimiting
[    6.946680] 8021q: 802.1Q VLAN Support v1.8
[    7.153319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.153333] Bluetooth: BNEP filters: protocol multicast
[    7.153355] Bluetooth: BNEP socket layer initialized
[    7.247529] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[    7.512865] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.512883] brcmfmac: power management disabled
[    7.616397] Bluetooth: RFCOMM TTY layer initialized
[    7.616422] Bluetooth: RFCOMM socket layer initialized
[    7.616454] Bluetooth: RFCOMM ver 1.11
[    8.046810] bcmgenet: Skipping UMAC reset
[    8.148832] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[    8.149159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.208629] bcmgenet fd580000.genet eth0: Link is Down
[   13.075357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   13.187830] fuse init (API version 7.27)
[   57.052948] w1_master_driver w1_bus_master1: Attaching one wire slave 00.800000000000 crc 8c
[   57.060443] w1_master_driver w1_bus_master1: Family 0 for 00.800000000000.8c is not registered.
[  116.161193] usb 1-1.4: USB disconnect, device number 5
[  116.578373] usb 1-1.4: new full-speed USB device number 6 using xhci_hcd
[  116.724923] usb 1-1.4: New USB device found, idVendor=8086, idProduct=0808, bcdDevice= 1.00
[  116.724939] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  116.724952] usb 1-1.4: Product: USB PnP Sound Device
[  116.724964] usb 1-1.4: Manufacturer: C-Media Electronics Inc.      
[  116.803137] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:8086:0808.0003/input/input3
[  116.868756] hid-generic 0003:8086:0808.0003: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:01:00.0-1.4/input3
[  116.929381] usb 1-1.4: USB disconnect, device number 6
[  120.652846] w1_master_driver w1_bus_master1: Attaching one wire slave 00.400000000000 crc 46
[  120.660257] w1_master_driver w1_bus_master1: Family 0 for 00.400000000000.46 is not registered.
[  127.938968] usb 1-1.1: USB disconnect, device number 3
[  128.348361] usb 1-1.1: new full-speed USB device number 7 using xhci_hcd
[  128.485201] usb 1-1.1: New USB device found, idVendor=0eef, idProduct=0005, bcdDevice= 2.00
[  128.485217] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  128.485230] usb 1-1.1: Product: WS170120
[  128.485243] usb 1-1.1: Manufacturer: WaveShare
[  128.485255] usb 1-1.1: SerialNumber: bó967493657
[  128.497081] input: WaveShare WS170120 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0005.0004/input/input4
[  128.497980] hid-multitouch 0003:0EEF:0005.0004: input,hidraw0: USB HID v1.10 Device [WaveShare WS170120] on usb-0000:01:00.0-1.1/input0
[  128.808403] usb 1-1.4: new full-speed USB device number 8 using xhci_hcd
[  128.942755] usb 1-1.4: New USB device found, idVendor=0c76, idProduct=161f, bcdDevice= 1.00
[  128.942765] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  128.942773] usb 1-1.4: Product: USB PnP Audio Device
[  128.971018] usb 1-1.4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[  128.971035] usb 1-1.4: [51] FU [Mic Playback Volume] ch = 1, val = 0/7936/16
[  128.983017] usb 1-1.4: Warning! Unlikely big volume range (=1008), cval->res is probably wrong.
[  128.983035] usb 1-1.4: [49] FU [Speaker Playback Volume] ch = 2, val = -16129/-1/16
[  128.995396] usb 1-1.4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[  128.995413] usb 1-1.4: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[  129.000449] input: USB PnP Audio Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0C76:161F.0005/input/input5
[  129.068802] hid-generic 0003:0C76:161F.0005: input,hidraw1: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:01:00.0-1.4/input3
[  171.415235] w1_master_driver w1_bus_master1: Attaching one wire slave 00.c00000000000 crc ca
[  171.422841] w1_master_driver w1_bus_master1: Family 0 for 00.c00000000000.ca is not registered.
[  247.856853] w1_master_driver w1_bus_master1: Attaching one wire slave 00.200000000000 crc 23
[  247.864127] w1_master_driver w1_bus_master1: Family 0 for 00.200000000000.23 is not registered.
[  311.457558] w1_master_driver w1_bus_master1: Attaching one wire slave 00.a00000000000 crc af
[  311.464961] w1_master_driver w1_bus_master1: Family 0 for 00.a00000000000.af is not registered.
[  349.378360] w1_master_driver w1_bus_master1: Attaching one wire slave 00.600000000000 crc 65
[  349.391867] w1_master_driver w1_bus_master1: Family 0 for 00.600000000000.65 is not registered.
[  389.858412] w1_master_driver w1_bus_master1: Attaching one wire slave 00.e00000000000 crc e9
[  389.865763] w1_master_driver w1_bus_master1: Family 0 for 00.e00000000000.e9 is not registered.
[  452.859117] w1_master_driver w1_bus_master1: Attaching one wire slave 00.100000000000 crc 9d
[  452.867821] w1_master_driver w1_bus_master1: Family 0 for 00.100000000000.9d is not registered.
[  491.979541] w1_master_driver w1_bus_master1: Attaching one wire slave 00.900000000000 crc 11
[  491.987859] w1_master_driver w1_bus_master1: Family 0 for 00.900000000000.11 is not registered.
[  567.220362] w1_master_driver w1_bus_master1: Attaching one wire slave 00.500000000000 crc db
[  567.227699] w1_master_driver w1_bus_master1: Family 0 for 00.500000000000.db is not registered.
[  619.180931] w1_master_driver w1_bus_master1: Attaching one wire slave 00.d00000000000 crc 57
[  619.189230] w1_master_driver w1_bus_master1: Family 0 for 00.d00000000000.57 is not registered.
[  645.631260] w1_master_driver w1_bus_master1: Attaching one wire slave 00.300000000000 crc be
[  645.639916] w1_master_driver w1_bus_master1: Family 0 for 00.300000000000.be is not registered.
[  695.027238] w1_master_driver w1_bus_master1: Attaching one wire slave 00.b00000000000 crc 32
[  695.038198] w1_master_driver w1_bus_master1: Family 0 for 00.b00000000000.32 is not registered.
[  734.309724] w1_master_driver w1_bus_master1: Attaching one wire slave 00.700000000000 crc f8
[  734.318401] w1_master_driver w1_bus_master1: Family 0 for 00.700000000000.f8 is not registered.
[  786.272313] w1_master_driver w1_bus_master1: Attaching one wire slave 00.f00000000000 crc 74
[  786.280599] w1_master_driver w1_bus_master1: Family 0 for 00.f00000000000.74 is not registered.
[  848.754706] w1_master_driver w1_bus_master1: Attaching one wire slave 00.080000000000 crc c2
[  848.763064] w1_master_driver w1_bus_master1: Family 0 for 00.080000000000.c2 is not registered.
[  901.996198] w1_master_driver w1_bus_master1: Attaching one wire slave 00.880000000000 crc 4e
[  902.004560] w1_master_driver w1_bus_master1: Family 0 for 00.880000000000.4e is not registered.
[  939.839370] w1_master_driver w1_bus_master1: Attaching one wire slave 00.480000000000 crc 84
[  939.847671] w1_master_driver w1_bus_master1: Family 0 for 00.480000000000.84 is not registered.
[  990.522994] w1_master_driver w1_bus_master1: Attaching one wire slave 00.c80000000000 crc 08
[  990.531064] w1_master_driver w1_bus_master1: Family 0 for 00.c80000000000.08 is not registered.
[ 1067.207358] w1_master_driver w1_bus_master1: Attaching one wire slave 00.280000000000 crc e1
[ 1067.214654] w1_master_driver w1_bus_master1: Family 0 for 00.280000000000.e1 is not registered.
[ 1130.730369] w1_master_driver w1_bus_master1: Attaching one wire slave 00.a80000000000 crc 6d
[ 1130.738725] w1_master_driver w1_bus_master1: Family 0 for 00.a80000000000.6d is not registered.
[ 1194.253455] w1_master_driver w1_bus_master1: Attaching one wire slave 00.680000000000 crc a7
[ 1194.265998] w1_master_driver w1_bus_master1: Family 0 for 00.680000000000.a7 is not registered.
[ 1234.654655] w1_master_driver w1_bus_master1: Attaching one wire slave 00.e80000000000 crc 2b
[ 1234.662056] w1_master_driver w1_bus_master1: Family 0 for 00.e80000000000.2b is not registered.
[ 1278.832384] usb 1-1.4: USB disconnect, device number 8
[ 1297.817105] w1_master_driver w1_bus_master1: Attaching one wire slave 00.180000000000 crc 5f
[ 1297.825454] w1_master_driver w1_bus_master1: Family 0 for 00.180000000000.5f is not registered.
[ 1309.852998] usb 1-1.4: new full-speed USB device number 9 using xhci_hcd
[ 1309.999566] usb 1-1.4: New USB device found, idVendor=8086, idProduct=0808, bcdDevice= 1.00
[ 1309.999576] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1309.999584] usb 1-1.4: Product: USB PnP Sound Device
[ 1309.999592] usb 1-1.4: Manufacturer: C-Media Electronics Inc.      
[ 1310.078702] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:8086:0808.0006/input/input6
[ 1310.143573] hid-generic 0003:8086:0808.0006: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:01:00.0-1.4/input3
[ 1337.018482] w1_master_driver w1_bus_master1: Attaching one wire slave 00.980000000000 crc d3
[ 1337.025802] w1_master_driver w1_bus_master1: Family 0 for 00.980000000000.d3 is not registered.
[ 1386.340264] w1_master_driver w1_bus_master1: Attaching one wire slave 00.580000000000 crc 19
[ 1386.347592] w1_master_driver w1_bus_master1: Family 0 for 00.580000000000.19 is not registered.
[ 1438.382995] w1_master_driver w1_bus_master1: Attaching one wire slave 00.d80000000000 crc 95
[ 1438.390385] w1_master_driver w1_bus_master1: Family 0 for 00.d80000000000.95 is not registered.
[ 1464.904899] w1_master_driver w1_bus_master1: Attaching one wire slave 00.380000000000 crc 7c
[ 1464.913400] w1_master_driver w1_bus_master1: Family 0 for 00.380000000000.7c is not registered.
[ 1514.388350] w1_master_driver w1_bus_master1: Attaching one wire slave 00.b80000000000 crc f0
[ 1514.396615] w1_master_driver w1_bus_master1: Family 0 for 00.b80000000000.f0 is not registered.
[ 1579.112221] w1_master_driver w1_bus_master1: Attaching one wire slave 00.780000000000 crc 3a
[ 1579.119610] w1_master_driver w1_bus_master1: Family 0 for 00.780000000000.3a is not registered.
[ 1631.155209] w1_master_driver w1_bus_master1: Attaching one wire slave 00.f80000000000 crc b6
[ 1631.162538] w1_master_driver w1_bus_master1: Family 0 for 00.f80000000000.b6 is not registered.
[ 1693.798496] w1_master_driver w1_bus_master1: Attaching one wire slave 00.040000000000 crc 61
[ 1693.805808] w1_master_driver w1_bus_master1: Family 0 for 00.040000000000.61 is not registered.
[ 1747.121208] w1_master_driver w1_bus_master1: Attaching one wire slave 00.840000000000 crc ed
[ 1747.128566] w1_master_driver w1_bus_master1: Family 0 for 00.840000000000.ed is not registered.
[ 1810.564230] w1_master_driver w1_bus_master1: Attaching one wire slave 00.440000000000 crc 27
[ 1810.571607] w1_master_driver w1_bus_master1: Family 0 for 00.440000000000.27 is not registered.
[ 1861.326571] w1_master_driver w1_bus_master1: Attaching one wire slave 00.c40000000000 crc ab
[ 1861.333891] w1_master_driver w1_bus_master1: Family 0 for 00.c40000000000.ab is not registered.
[ 1886.247747] w1_master_driver w1_bus_master1: Attaching one wire slave 00.240000000000 crc 42
[ 1886.255106] w1_master_driver w1_bus_master1: Family 0 for 00.240000000000.42 is not registered.
[ 1897.677457] usb 1-1.4: USB disconnect, device number 9
[ 1905.358575] usb 1-1.1: USB disconnect, device number 7
[ 1905.754102] usb 1-1.1: new full-speed USB device number 10 using xhci_hcd
[ 1905.890982] usb 1-1.1: New USB device found, idVendor=0eef, idProduct=0005, bcdDevice= 2.00
[ 1905.890998] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1905.891011] usb 1-1.1: Product: WS170120
[ 1905.891023] usb 1-1.1: Manufacturer: WaveShare
[ 1905.891036] usb 1-1.1: SerialNumber: bó967493657
[ 1905.902866] input: WaveShare WS170120 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0EEF:0005.0007/input/input7
[ 1905.903415] hid-multitouch 0003:0EEF:0005.0007: input,hidraw0: USB HID v1.10 Device [WaveShare WS170120] on usb-0000:01:00.0-1.1/input0
[ 1906.204105] usb 1-1.4: new full-speed USB device number 11 using xhci_hcd
[ 1906.338519] usb 1-1.4: New USB device found, idVendor=0c76, idProduct=161f, bcdDevice= 1.00
[ 1906.338526] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1906.338532] usb 1-1.4: Product: USB PnP Audio Device
[ 1906.365783] usb 1-1.4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[ 1906.365791] usb 1-1.4: [51] FU [Mic Playback Volume] ch = 1, val = 0/7936/16
[ 1906.376773] usb 1-1.4: Warning! Unlikely big volume range (=1008), cval->res is probably wrong.
[ 1906.376781] usb 1-1.4: [49] FU [Speaker Playback Volume] ch = 2, val = -16129/-1/16
[ 1906.387773] usb 1-1.4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[ 1906.387780] usb 1-1.4: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[ 1906.391709] input: USB PnP Audio Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0C76:161F.0008/input/input8
[ 1906.454288] hid-generic 0003:0C76:161F.0008: input,hidraw1: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:01:00.0-1.4/input3
[ 1949.850533] w1_master_driver w1_bus_master1: Attaching one wire slave 00.a40000000000 crc ce
[ 1949.857907] w1_master_driver w1_bus_master1: Family 0 for 00.a40000000000.ce is not registered.

 I set alredy "Audio.Mixer=PCM" or also to "Speaker" but nothing changed.

May the physic slider is the problem?
However I tried with an old soul card like that

https://www.ebay.it/i/232651613673?chn=ps&norover=1&mkevt=1&mkrid=724-128315-5854-1&mkcid=2&itemid=232651613673&targetid=883693966700&device=c&mktype=pla&googleloc=1008078&poi=&campaignid=9561703854&mkgroupid=98418255815&rlsatarget=pla-883693966700&abcId=1145978&merchantid=116448441&gclid=Cj0KCQjwmdzzBRC7ARIsANdqRRkkxlioPArQsfYx3vpvqxBfU9JtFg0RuRRy0zOSloeDDjiGc4dvUV8aAvswEALw_wcB

but it was the same.

If you need any other info, please tell me and I will post them as soon as I can.
Thanks


RE: Volume slider disabled with sound card on OAP 6.1 - BlueWave - 03-22-2020

Please try to set MixerName=Speaker in /home/pi/.openauto/config/openauto_system.ini file.


RE: Volume slider disabled with sound card on OAP 6.1 - lemuertdmamt - 03-22-2020

(03-22-2020, 02:32 PM)BlueWave Wrote: Please try to set MixerName=Speaker in /home/pi/.openauto/config/openauto_system.ini file.

Nothing, it's the same...


RE: Volume slider disabled with sound card on OAP 6.1 - BlueWave - 03-22-2020

Please modify /home/pi/.asoundrc file as below

pcm.!default {
        type plug
        slave.pcm "hw:1,1"
}

ctl.!default {
        type hw
        card 1
}

reboot the system and post the output of amixer -l command.

Did you revert the MixerName changes when connected the "3D Sound" sound card?


RE: Volume slider disabled with sound card on OAP 6.1 - lemuertdmamt - 03-22-2020

(03-22-2020, 08:13 PM)BlueWave Wrote: Please modify /home/pi/.asoundrc file as below

pcm.!default {
        type plug
        slave.pcm "hw:1,1"
}

ctl.!default {
        type hw
        card 1
}

reboot the system and post the output of amixer -l command.

Did you revert the MixerName changes when connected the "3D Sound" sound card?


Thank you so much! It Worked!

The MixerName still set in "Speaker", and the amixer -l output is this:
pi@raspberrypi:~ $ amixer -l
amixer: invalid option -- 'l'
Invalid switch or option needs an argument.
Usage: amixer <options> [command]

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
  -R,--raw-volume Use the raw value (default)
  -M,--mapped-volume Use the mapped volume

Available commands:
  scontrols       show all mixer simple controls
  scontents	  show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control

However it seems to work well.

Now, should I leave the MixerName set in "Speaker" or change it to "PCM"?


(For the "3D Sound" sound card I tried both modes of the MixerName and didn't worked. Now it works too)

Thanks again


RE: Volume slider disabled with sound card on OAP 6.1 [SOLVED] - BlueWave - 03-22-2020

Great to hear that!

You do not have mixer named PCM. The only one is the Speaker. You can keep current MixerName value or just leave it empty (then it should be automatically detected by OpenAuto Pro).


RE: Volume slider disabled with sound card on OAP 6.1 [SOLVED] - lemuertdmamt - 11-06-2020

Hi, after the AOP 10 update, the disabled volume slider problem returned.
The setting are the same that I left, the audio works fine.
What do I have to modify?
Thanks


RE: Volume slider disabled with sound card on OAP 6.1 [SOLVED] - BlueWave - 11-06-2020

Please post log file located at /home/pi/.openauto/cache/openauto.log


RE: Volume slider disabled with sound card on OAP 6.1 [SOLVED] - lemuertdmamt - 11-06-2020

Here it is:
[2020-11-05 11:48:32.529504] [0xb0ac1010] [info]    [OpenAuto] [VolumeManager] manual mixer selection, name: Speaker, id: 0
[2020-11-05 11:48:32.529599] [0xb0ac1010] [error]   [OpenAuto] [VolumeManager] unable to find selem name.
[2020-11-05 11:48:33.284556] [0xb0ac1010] [debug]   [OpenAuto] [TemperatureSensorManager] start.
[2020-11-05 11:48:33.338676] [0xa5cfb140] [info]    [OpenAuto] [AndroidAutoManager] initialized display region width: 1024, height: 600, x: 0, y: 0
[2020-11-05 11:48:33.338932] [0xa54fa140] [info]    [OpenAuto] [AndroidAutoManager] initialized screen geometry width: 1024, height: 600, x: 0, y: 0
[2020-11-05 11:48:33.382229] [0xb0ac1010] [error]   [OpenAuto] [StorageMusicManager] selecting directory error: filesystem error: cannot increment recursive directory iterator: Permesso negato
[2020-11-05 11:48:33.382385] [0xb0ac1010] [info]    [OpenAuto] [BluetoothSubsystem] starting bluetooth manager service.
[2020-11-05 11:48:33.384018] [0xb0ac1010] [info]    [OpenAuto] [DayNightController] openauto manual mode changed, mode: 1
[2020-11-05 11:48:33.384070] [0xb0ac1010] [debug]   [OpenAuto] [RearCameraController] start.
[2020-11-05 11:48:33.384241] [0xb0ac1010] [debug]   [OpenAuto] [ObdManager] start.
[2020-11-05 11:48:33.384268] [0xb0ac1010] [warning] [OpenAuto] [ObdManager] device is not configured.
[2020-11-05 11:48:34.284981] [0x9e195140] [error]   [OpenAuto] [TemperatureSensorManager] Unable to open: /sys/bus/w1/devices/28-0119137e63ff/w1_slave
[2020-11-05 11:48:34.306433] [0xb0ac1010] [info]    [OpenAuto] [OpenAuto] initializing interprocess routines.
[2020-11-05 11:48:34.307806] [0xb0ac1010] [info]    [OpenAuto] [OpenAuto] initialized interprocess routines.
[2020-11-05 11:48:34.338865] [0xb0ac1010] [info]    [OpenAuto] [HandsFreeModemsList] telephony availability changed: true
[2020-11-05 11:48:34.338933] [0xb0ac1010] [info]    [OpenAuto] [HandsFreeModemsList] looking up modems, availability: true
[2020-11-05 11:48:34.339218] [0xb0ac1010] [info]    [OpenAuto] [BaseEqualizerManager] server address call finished, result: 0
[2020-11-05 11:48:34.339343] [0xb0ac1010] [info]    [OpenAuto] [BaseEqualizerManager] connecting to server: unix:path=/run/user/1000/pulse/dbus-socket
[2020-11-05 11:48:34.340930] [0xb0ac1010] [info]    [OpenAuto] [BaseEqualizerManager] connection result: true
[2020-11-05 11:48:34.354422] [0xa5cfb140] [info]    [OpenAuto] [AndroidAutoManager] initialized display region width: 1024, height: 600, x: 0, y: 0
[2020-11-05 11:48:34.354511] [0xa5cfb140] [info]    [OpenAuto] [AndroidAutoManager] initialized screen geometry width: 1024, height: 600, x: 0, y: 0
[2020-11-05 11:48:34.928206] [0xb0ac1010] [info]    [OpenAuto] [LadspaEqualizerManager] get sink by name call finished, result: 0
[2020-11-05 11:48:34.928314] [0xb0ac1010] [info]    [OpenAuto] [LadspaEqualizerManager] sink path: /org/pulseaudio/core1/sink1, connection: 0x1a1b4e0
[2020-11-05 11:48:34.930006] [0xb0ac1010] [info]    [OpenAuto] [BluetoothSubsystem] bluetooth service start finished, value: 2, error: 0
[2020-11-05 11:48:34.961154] [0xb0ac1010] [info]    [OpenAuto] [BluetoothSubsystem] bluetooth manager start finished, value: 100
[2020-11-05 20:01:49.761764] [0xb0ac1010] [info]    [OpenAuto] [DayNightController] openauto manual mode changed, mode: 0
[2020-11-05 20:02:11.764491] [0xb0ac1010] [info]    [OpenAuto] [DayNightController] openauto manual mode changed, mode: 1



RE: Volume slider disabled with sound card on OAP 6.1 [SOLVED] - BlueWave - 11-06-2020

First please try automatic selection of the mixer. In order to that leave MixerName value empty in /home/pi/.openauto/config/openauto_system.ini file. Most probably name of the mixer has been changed after Raspberry PI OS update. If automatic selection will not work please try to figure out new name of the mixer using amixer command.